QQ:543060174/327814406
| 咨询电话:010-61272284 400-090-1985
| 网址:http://www.stdbook.org
| E-MAIL:gwbz@263.net
|
标准号 |
中文名 |
英文名 |
状态 |
ASTM E2793-2016 |
E274摩擦力测量系统和设备的评估 ,校正和相关性的标准指南 |
Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment |
正常 |
ASTM E2793-2016 |
E274摩擦力测量系统和设备的评估 ,校正和相关性的标准指南 |
Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment |
正常 |
JB/ZQ 4767-2006 |
长形油标 |
Oil level indicator of length type |
正常 |
JB/ZQ 4766-2006 |
圆形油标 |
Round oil leveler |
正常 |
JB/ZQ 4752-2006 |
电动润滑泵(20MPa) |
Electric lubricant pump (20MPa) |
正常 |
JB/ZQ 4749-2006 |
油气分配器 |
Oil gas distributor |
正常 |
JB/ZQ 4739-2006 |
电动多点润滑泵 |
Electric multi-point lubricant pump |
正常 |
JB/ZQ 4738-2006 |
油气润滑装置 |
Oil gas lubrication device |
正常 |
JB/ZQ 4736-2006 |
行车轨道润滑装置 |
Vehicle orbit lubricant device |
正常 |
JB/ZQ 4735-2006 |
稀油润滑装置(0.4MPa) |
Thin oil lubrication equipment (0.4MPa) |
正常 |
JB/ZQ 4734-2006 |
油流监视器 |
Oil flow indicator |
正常 |
JB/ZQ 4733-2006 |
链条喷射润滑装置 |
Chain jet lubrication device |
正常 |
JB/ZQ 4731-2006 |
脚踏润滑泵 |
Brake lubricant pump |
正常 |
JB/ZQ 4550-2006 |
递进分配器(16MPa) |
Progressive plunger metering valves (16 MPa) |
正常 |
JB/ZQ 4711-2006 |
油气润滑装置 |
Oil gas lubrication device |
正常 |
JB/ZQ 4710-2006 |
油雾润滑装置 |
Oil mist lubrication device |
正常 |
JB/ZQ 4708-2006 |
积水报警器 |
Ponding alarm |
正常 |
JB/ZQ 4705-2006 |
悬挂输送机自动润滑装置 |
Auto lubricating apparatus for pensile conveyer |
正常 |
JB/ZQ 4704-2006 |
双线分配器(40MPa) |
Two-line metering device (40MPa) |
正常 |
JB/ZQ 4703-2006 |
递进分配器(20MPa) |
Progressive plunger metering valve (20MPa) |
正常 |
JB/ZQ 4592-2006 |
双筒网式磁芯过滤器 |
Double cylindric netting filters - Magnetic core |
正常 |
JB/ZQ 4586-2006 |
稀油润滑装置(0.63MPa) |
Thin oil lubrication device (0.63 MPa) |
正常 |
JB/ZQ 4567-2006 |
链条自动润滑装置 |
Chain automatic lubricating devices |
正常 |
JB/ZQ 4561-2006 |
递进分配器(20MPa) |
Progressive plunger metering valves (20 MPa) |
正常 |
JB/ZQ 4560-2006 |
双线分配器(20MPa) |
Two-line metering valves (20 MPa) |
正常 |
JB/T 8522-2014 |
稀油润滑装置 型式、基本参数与尺寸 |
The oil lubrication equipment.The type, basic parameter and size |
正常 |
JB/T 4121-1993 |
润滑元件及装置.型号编制方法 |
Lubricating elements and devices Method for designing types |
正常 |
BS 4231-1992 |
工业液体润滑剂粘度等级分类 |
Classification for viscosity grades of industrial liquid lubricants |
正常 |
BS 5077-1974 |
同BS 4507规定的润滑脂筒配合使用的润滑脂枪(手动操作杆型)规范 |
Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507 |
正常 |
EN 4019-2001 |
航空航天系列.钛合金管连接件 8°30'.焊接端的 90°弯头; 德文版本 EN 4019:2001 |
Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end; German version EN 4019:2001 |
正常 |
EN 4021-2001 |
航空航天系列.钛合金管连接件 8°30'.闷头 90°弯头; 德文版本 EN 4021:2001 |
Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, bulkhead; German version EN 4021:2001 |
正常 |
ANSI/ASTM E2336-2004 |
防火润滑脂管道封装系统的试验方法 |
Test Methods For Fire Resistive Grease Duct Enclosure Systems |
正常 |
DIN 69090-4-2014 |
MQL加工技术. 第4部分: 攻丝夹头和锁片/冷成型锁片 |
MQL processing technology - Part 4: Tapping chuck and tab/cold forming tab |
正常 |
DIN 1282-1990 |
润滑脂枪.手动挤压式油枪 |
Grease guns; push type-hand gun |
正常 |
DIN 1283-1990 |
滑油枪.手动杠杆式油枪和附件 |
Grease guns; lever type-hand guns and accessories |
正常 |
DIN EN 4019-2002 |
航空航天系列.钛合金管连接件 8°30'.焊接端的 90°弯头; 德文版本 EN 4019:2001 |
Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end; German version EN 4019:2001 |
正常 |
DIN EN 4021-2002 |
航空航天系列.钛合金管连接件 8°30'.闷头 90°弯头; 德文版本 EN 4021:2001 |
Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, bulkhead; German version EN 4021:2001 |
正常 |
DIN 1284-1990 |
润滑脂枪.杠杆式滑油枪的润滑脂筒.主要尺寸 |
Grease guns; grease cartridges for lever type-hand gun; main dimensions |
正常 |
DIN 8659-1-1980 |
机床.第1部分:机床用润滑油、润滑油用法说明 |
Machine tools; lubrication of machine tools, lubrication instructions |
正常 |
DIN 3412-1972 |
润滑油箱.重型结构 |
Grease box; heavy construction |
正常 |
DIN 3411-1972 |
润滑油箱.轻型结构 |
Grease box; light construction |
正常 |
DIN 51502-1990 |
润滑剂的牌号和润滑剂容器的标记.润滑剂的符号、设备和润滑点 |
Designation of lubricants and marking of lubricant containers, equipment and lubricating points |
正常 |
DIN 24271-2-1982 |
集中润滑系统.第2部分:技术图纸的图形符号 |
Centralized lubrication systems; Graphic symbols for technical drawings |
正常 |
DIN 24271-3-1982 |
集中润滑系统.第3部分:技术数值及单位 |
Centralized lubrication systems; Technical quantities and units |
正常 |
DIN 8659-2-1980 |
机床.机床的润滑.切削加工机床用润滑剂的选择 |
Machine tools; lubrication of machine tools, selection of lubricants for machine tools operating by removing metal |
正常 |
DIN 3404-1988 |
扁平注油嘴 |
Lubricating nipples; button head |
正常 |
DIN 3405-1986 |
杯形润滑油嘴 |
Lubricating nipples cupped type |
正常 |
DIN 3410-1974 |
润滑油排出管嘴.总尺寸和装配尺寸 |
Lubricating nipples; overall and fitting dimensions |
正常 |
DIN 3401-1966 |
滴油注油器和油杯.主要尺寸 |
Drip-feed lubricators and cups; main dimensions |
正常 |
JIS B1575 ERRATUM 1-2001 |
油脂枪喷嘴(勘误1) |
(Erratum 1) |
正常 |
JIS B9808-1991 |
润滑脂枪 |
Grease guns |
正常 |
JIS B1575-2000 |
油脂枪喷嘴 |
Grease nipples |
正常 |
NF M88-759-2015 |
液化石油气设备和附件. 液化石油气压力容器的泄压阀. 重新调节要求 |
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements |
正常 |
NF M88-950-1986 |
石油工业.润滑油压射器.尺寸 |
Petroleum industrie. Grease catriges. Dimensions. |
正常 |
GB/T 1156-2011 |
旋套式注油油杯 |
Sleeve type drip-feed lubricating cups |
正常 |
GB 1166-1989 |
油枪技术条件 |
|
(作废) |
GB 1152-1989 |
直通式压注油杯 |
|
(作废) |
GB 1153-1989 |
接头式压注油杯 |
|
(作废) |
GB 1155-1989 |
压配式压注油杯 |
Push-fit type grease nipples |
正常 |
GB 10602-1989 |
润滑装置及元件 检查验收规则 |
|
(作废) |
GB 1154-1989 |
旋盖式油杯 |
|
(作废) |
GB 1164-1989 |
压杆式油枪 |
|
(作废) |
GB 1163-1989 |
油标技术条件 |
|
(作废) |
GB 1165-1989 |
手推式油枪 |
|
(作废) |
GB 1162-1989 |
管状油标 |
|
(作废) |
GB 1161-1989 |
长形油标 |
|
(作废) |
GB 1160.2-1989 |
旋入式圆形油标 |
|
(作废) |
GB 1160.1-1989 |
压配式圆形油标 |
|
(作废) |
GB 1159-1989 |
油杯技术条件 |
|
(作废) |
GB 1158-1989 |
针阀式 注油杯 |
|
(作废) |
GB 1157-1989 |
弹簧盖油杯 |
|
(作废) |
GB 5865-1986 |
润滑系统及元件基本参数 |
|
(作废) |
GB/T 1156-1979 |
旋套式注油油杯 基本型式与尺寸 |
|
(作废) |
JB/T 7943.2-2017 |
润滑装置及元件 第2部分:检查验收规则 |
|
正常 |
JB/T 7943.1-2017 |
润滑系统及元件 第1部分:基本参数 |
|
正常 |
JB/T 3711.3-2017 |
集中润滑系统 第3部分:技术量和单位 |
|
正常 |
JB/T 3711.2-2017 |
集中润滑系统 第2部分:图形符号 |
|
正常 |
JB/T 3711.1-2017 |
集中润滑系统 第1部分:术语和分类 |
|
正常 |
JB/T 8463-2017 |
润滑系统 二位四通换向阀(40MPa) |
|
正常 |
JB/T 13323-2017 |
移动式电动润滑装置(20MPa) |
|
正常 |
JB/T 13322-2017 |
双列式电动润滑脂泵(20MPa) |
|
正常 |
JB/T 13321-2017 |
手动润滑泵(10MPa、20MPa) |
|
正常 |
JB/T 13320-2017 |
润滑系统 液压换向阀(20MPa、31.5MPa) |
|
正常 |
JB/T 13319-2017 |
润滑系统 压力操纵阀(20MPa) |
|
正常 |
JB/T 13318-2017 |
机动多点润滑泵 |
|
正常 |
JB/T 13317-2017 |
多点油脂泵(10MPa) |
|
正常 |
JB/T 13316-2017 |
电动润滑泵装置 |
|
正常 |
JB/T 13315-2017 |
电动加油泵(1MPa、3MPa) |
|
正常 |
JB/T 13314-2017 |
QHZ型油气润滑装置 |
|
正常 |
JB/T 13313-2017 |
油气混合器 |
|
正常 |
JB/T 12687-2016(2017) |
离心式洁油器 |
|
正常 |
JB/T 8810.3-2016(2017) |
油脂润滑泵 第3部分:多点润滑泵(31.5MPa) |
|
正常 |
JB/T 8810.1-2016(2017) |
油脂润滑泵 第1部分:电动润滑泵(40MPa) |
|
正常 |
JB/T 8462-2016(2017) |
双线分配器(40MPa) |
|
正常 |
JB/T 7356-2016(2017) |
列管式油冷却器 |
|
正常 |
JB/T 10465-2016(2017) |
稀油润滑装置 技术条件 |
|
正常 |
JB/T 12704-2016(2017) |
自动控制润滑泵站(40MPa) |
|
正常 |
JB/T 12703-2016(2017) |
双柱升降式电动油脂泵(20MPa) |
|
正常 |
JB/T 12702-2016(2017) |
双筒网式磁芯过滤器 |
|
正常 |
JB/T 12701-2016(2017) |
润滑系统 自动换向阀(40MPa) |
|
正常 |
JB/T 12700-2016(2017) |
润滑系统 压力控制器 |
|
正常 |
JB/T 12699-2016(2017) |
润滑系统 电磁截止阀(31.5MPa) |
|
正常 |
JB/T 12698-2016(2017) |
模块式双线分配器(40MPa) |
|
正常 |
JB/T 12697-2016(2017) |
免加脂电动润滑泵(20MPa) |
|
正常 |
JB/T 12696-2016(2017) |
集中补脂装置 |
|
正常 |
JB/T 12695-2016(2017) |
动静压轴承用稀油润滑装置 |
|
正常 |
JB/T 12694-2016(2017) |
单线分配器(31.5MPa) |
|
正常 |
JB/T 12693-2016(2017) |
油气润滑站 |
|
正常 |
JB/T 12692-2016(2017) |
油气分配器 |
|
正常 |
JB/T 12691-2016(2017) |
润滑装置用螺杆泵 |
|
正常 |
JB/T 12690-2016(2017) |
气动加油泵 |
|
正常 |
JB/T 12689-2016(2017) |
连铸机干油润滑装置 |
|
正常 |
JB/T 12688-2016(2017) |
连铸机干油集中加油站 |
|
正常 |
JB/T 8522-2014(2017) |
稀油润滑装置 型式、基本参数与尺寸 |
|
正常 |
JB/T 10465-2004(2010) |
稀油润滑装置 技术条件 |
Thin oil lubrication equipment -- Technical requirements |
(作废) |
ZB J21001-87 |
气动凿岩机用注油器 |
|
(作废) |
JB 4121-1985 |
润滑元件 型号编制方法 |
|
(作废) |
JB/T 8811.2-1998 |
手动加油泵2.5MPa |
Hardful oil or grease pumps 2.5MPa |
正常 |
JB/T 8811.1-1998 |
电动加油泵4MPa |
Electrical oil or grease pumps 4 MPa |
正常 |
JB/T 8810.3-1998 |
多点润滑泵31.5MPa |
Multipe-point lubrication pumps 31.5 Mpa |
(作废) |
JB/T 8810.2-1998 |
单线润滑泵31.5MPa |
Single-line lubrication pumps 31.5 MPa |
正常 |
JB/T 8810.1-1998 |
电动润滑泵40MPa |
Electrical lubrication pumps 40 Mpa |
(作废) |
JB/T 7942.1-1995 |
压杆式油枪 |
Lever type grease guns |
正常 |
JB/T 7941.5-1995 |
油标技术条件 |
Technical specification for oil pointers |
正常 |
JB/T 7941.4-1995 |
管状油标 |
Tubular oil pointers |
正常 |
JB/T 7941.3-1995 |
长形油标 |
Long-shaped oil pointers |
正常 |
JB/T 7941.2-1995 |
旋入式圆形油标 |
Screw in round oil pointers |
正常 |
JB/T 7941.1-1995 |
压配式圆形油标 |
Oil level indicators push-fit round type |
正常 |
JB/T 7940.7-1995 |
油杯技术条件 |
Grease nipples and lubricating cups technical specification |
正常 |
JB/T 7940.6-1995 |
针阀式注油杯 |
Drip-feed type lubricating cups |
正常 |
JB/T 7940.5-1995 |
弹簧盖油杯 |
Spring cap type lubricating cups |
正常 |
JB/T 8522-1997 |
稀油润滑装置 型式、基本参数与尺寸 |
|
(作废) |
JB/T 7940.4-1995 |
压配式压注油杯 |
Push-fit type grease nipples |
正常 |
JB/T 7940.3-1995 |
旋盖式油杯 |
Screwing cap type lubricating cups |
正常 |
JB/T 7940.2-1995 |
接头式压注油杯 |
Angle hydraulic grease nipples |
正常 |
JB/T 7940.1-1995 |
直通式压注油杯 |
Straight hydraulic grease nipples |
正常 |
JB/T 8376-1996 |
定流向摆线转子润滑泵 |
Permanent flow cycloid rotor lubricant pump |
正常 |
JB/T 7943.2-1999 |
润滑装置及元件 检查验收规则 |
Recommendation for inspection of lubrication systems and elements |
(作废) |
JB/T 7943.1-1999 |
润滑系统及元件 基本参数 |
General specification for lubrication systems and elements |
(作废) |
JB/T 7942.3-1995 |
油枪技术条件 |
Grease guns technical specification |
正常 |
JB/T 7942.2-1995 |
手推式油枪 |
Lever type grease guns |
正常 |
JB/T 8465-1996 |
压差开关.40MPa |
Air differential pressure switches 40MPa |
正常 |
JB/T 8464-1996 |
递进分配器.40MPa |
Progressive plunger metering devices 40MPa |
正常 |
JB/T 8463-1996 |
二位四通换向阀 40MPa |
Two-position four-way reversing valves 40MPa |
(作废) |
JB/T 8462-1996 |
双线分配器40MPa |
Two-line metering devices 40MPa |
(作废) |
JB/T 4121-1993(2017) |
润滑元件及装置 型号编制方法 |
Lubricating elements and devices Method for designing types |
正常 |
JB/T 3711.3-1999 |
集中润滑系统 技术量和单位 |
Technical measurements and units for centralized lubrication systems |
(作废) |
JB/T 3711.2-1999 |
集中润滑系统 图形符号 |
General specification for lubrication systems and elements |
(作废) |
JB/T 3711.1-1999 |
集中润滑系统 术语和分类 |
Terms and classification for centralized lubrication systems |
(作废) |
JB 2309-1978 |
风动加油泵型式、参数与尺寸 |
|
(作废) |
JB 2308-1978 |
片式给油器型式、参数与尺寸 |
|
(作废) |
JB 2307-1978 |
双线给油器型式、参数与尺寸 |
|
(作废) |
JB 2306-1978 |
单线干油泵及装置型式、参数与尺寸 |
|
(作废) |
JB 2305-1978 |
多点干油泵型式、参数与尺寸 |
|
(作废) |
JB 2303-1978 |
油流指示器型式、参数与尺寸 |
|
(作废) |
JB 2302-1978 |
润滑设备双筒网式过滤器 型式、参数与尺寸 |
|
(作废) |
JB 2301-1978 |
斜齿轮油泵及装置型式、参数与尺寸 |
|
(作废) |
JB/T 2306-1999 |
单线干油泵及装置 型式、参数与尺寸 |
Type, parameters and dimensions of single line-grease pump and equipments |
(作废) |
JB/T 2304-2001 |
电动润滑泵装置 型式、参数与尺寸(20MPa) |
Type, specification and dimensions of electric grease station (20Mpa) |
(作废) |
JB/T 2302-1999 |
双筒网式过滤器.型式、参数与尺寸 |
Type,parameters and dimensions of double cylinderic neting-filter |
正常 |
JB/T 2301-1999 |
润滑设备斜齿轮油泵与装置.型式、参数与尺寸 |
Data and dimension of helical-gear-pump device for lubrication equipment |
正常 |
HB 6101-1986 |
航空滑油过滤器通用技术条件 |
|
(作废) |
HB 2-55-1983 |
接线盒锁用弹簧 |
|
正常 |
HB 2-16-1983 |
弹簧锁扣 |
|
正常 |