QQ:543060174/327814406
| 咨询电话:010-61272284 400-090-1985
| 网址:http://www.stdbook.org
| E-MAIL:gwbz@263.net
|
标准号 |
中文名 |
英文名 |
状态 |
GB/T 39328-2020 |
增材制造 塑料材料挤出成形工艺规范 |
|
正常 |
JB/ZQ 4261-2006 |
板材的冷弯 |
Cold bending of sheet metal |
正常 |
JB/T 9169.14-1998 |
工艺管理导则.工艺标准化 |
Guide for technological management.Technological standardization |
正常 |
JB/T 9169.13-1998 |
工艺管理导则.工艺情报 |
Guide for technological management.Technological information |
正常 |
JB/T 9169.12-1998 |
工艺管理导则.工艺试验研究与开发 |
Guide for technological management.Research and development |
正常 |
JB/T 9169.11-1998 |
工艺管理导则.工艺纪律管理 |
Guide for technological management.Manufacturing discipline management |
正常 |
JB/T 9169.10-1998 |
工艺管理导则.生产现场工艺管理 |
Guide for technological management.Technological management in processing |
正常 |
JB/T 9169.9-1998 |
工艺管理导则.工艺验证 |
Guide for technological management.Engineer verification |
正常 |
JB/T 9169.8-1998 |
工艺管理导则.工艺文件修改 |
Guide for technological management.Change for technological documentation |
正常 |
JB/T 9169.7-1998 |
工艺管理导则.工艺文件标准化审查 |
Guide for technological management.Review of standardization for technological documentation |
正常 |
JB/T 9169.6-1998 |
工艺管理导则.工艺定额编制 |
Guide for technoloogical management.Preparation of norm of the total material consuption and standard time in processing |
正常 |
JB/T 9169.5-1998 |
工艺管理导则.工艺规程设计 |
Guide for technological management.Design of procedure |
正常 |
JB/T 9169.4-1998 |
工艺管理导则.工艺方案设计 |
Guide for technological management.Design of manufactring plan |
正常 |
JB/T 9169.3-1998 |
工艺管理导则.产品结构工艺性审查 |
Guide for technological management.Review of technological efficiency of design of products |
正常 |
JB/T 9169.2-1998 |
工艺管理导则.产品工艺工作程序 |
Guide for technological management.Technological work procedure of products |
正常 |
JB/T 9169.1-1998 |
工艺管理导则.总则 |
Guide for technological management.General |
正常 |
JB/T 9167.5-1998 |
工艺装备设计管理导则.工艺装备验证规则 |
Management guide for tooling design Proof rule for tooling |
正常 |
JB/T 9167.4-1998 |
工艺装备设计管理导则.工艺装备设计程序 |
Management guide for tooling design Procedure for tooling design |
正常 |
JB/T 9167.3-1998 |
工艺装备设计管理导则.工艺装备设计任务书的编制规则 |
Management guide for tooling design Preparation rule for design job document for tooling |
正常 |
JB/T 9167.2-1998 |
工艺装备设计管理导则.工艺装备设计先择规则 |
Management guide for tooling design Selection rule of tooling design |
正常 |
JB/T 9167.1-1998 |
工艺装备设计管理导则.术语 |
Management guide for tooling design Vocabulary |
正常 |
JB/T 9166-1998 |
工艺文件编号方法 |
Numbering method for technological documentation |
正常 |
JB/T 9165.4-1998 |
专用工艺装备设计图样及设计文件 格式 |
Design drawing and documentation form for special tooling |
正常 |
JB/T 9165.3-1998 |
管理用工艺文件格式 |
Form of technological documentation for management |
正常 |
JB/T 9165.2-1998 |
工艺规程格式 |
Form of procedure |
正常 |
JB/T 9165.1-1998 |
工艺文件完整性 |
Completeness of technological documentation |
正常 |
JB/T 9164-1998 |
工艺装备编号方法 |
Numbering method for tooling |
正常 |
JB/T 7537-1994 |
工艺典型化导则 |
Guideline for techniques typification |
正常 |
JB/T 7510-1994 |
工艺参数优化方法.正交试验法 |
Technological parameter optimization method Orthogonal test method |
正常 |
JB/T 5992.10-1992 |
机械制造工艺方法分类与代码.其他工艺方法 |
Classification and codes for machine manufacturing process and method Other techniques |
正常 |
JB/T 5992.9-1992 |
机械制造工艺方法分类与代码.装配与包装 |
Classification and codes for machine manufacturing process and method Assembly and packaging |
正常 |
JB/T 5992.8-1992 |
机械制造工艺方法分类与代码.覆盖层 |
Classification and codes for machine manufacturing process and method Coating layer |
正常 |
JB/T 5992.7-1992 |
机械制造工艺方法分类与代码.热处理 |
Classification and codes for machine manufacturing process and method Heat treatment |
正常 |
JB/T 5992.6-1992 |
机械制造工艺方法分类与代码.特种加工 |
Classification and codes for machine manufacturing process and method Non-traditional machining |
正常 |
JB/T 5992.5-1992 |
机械制造工艺方法分类与代码.切削加工 |
Classification and codes for machine manufacturing process and method Cutting work |
正常 |
JB/T 5992.4-1992 |
机械制造工艺方法分类与代码.焊接 |
Classification and codes for machine manufacturing process and method Welding |
正常 |
JB/T 5992.3-1992 |
机械制造工艺方法分类与代码.压力加工 |
Classification and codes for machine manufacturing process and method Press working |
正常 |
JB/T 5992.2-1992 |
机械制造工艺方法分类与代码.铸造 |
Classification and codes for machine manufacturing process and method Foundry |
正常 |
JB/T 5992.1-1992 |
机械制造工艺方法分类与代码.总则 |
Classification and codes for machine manufacturing process and method General rules |
正常 |
BS ISO 13469-2014 |
机械连接. 壳式空心铆钉和螺栓 (锁) 连接. 试验规程的规格和限制 |
Mechanical joining. Form-fit blind rivets and (lock) bolt joints. Specifications and qualification of testing procedures |
正常 |
BS 6374-4-1984 |
加工工业用聚合材料设备衬套.第4部分:冷固化处理的热固性树脂制衬套规范 |
Lining of equipment with polymeric materials for the process industries - Specification for lining with cold curing thermosetting resins |
正常 |
BS 6374-3-1984 |
加工工业用聚合材料设备衬套.第3部分:烘干热固性树脂衬套规范 |
Lining of equipment with polymeric materials for the process industries - Specification for lining with stoved thermosetting resins |
正常 |
BS 6374-1-1985 |
加工工业用聚合材料设备衬套.第1部分:热塑塑料片制衬套规范 |
Lining of equipment with polymeric materials for the process idustries - Specification for lining with sheet thermoplastics |
正常 |
BS 6374-5-1985 |
加工工业用聚合材料设备衬套.第5部分:橡胶制衬套规范 |
Lining of equipment with polymeric materials for the process industries - Specification for lining with rubbers |
正常 |
BS 6374-2-1984 |
加工工业用聚合材料设备衬套.第2部分:非热塑性塑料片制衬套规范 |
Lining of equipment with polymeric materials for the process industries - Specification for lining with non-sheet applied thermoplastics |
正常 |
ANSI B11.5-1988 |
机床.钢铁制品.制造、维护和使用的安全要求 |
Machine Tools - Iron Workers - Safety Requirements for Construction, Care, and Use |
正常 |
DIN 8587-2003 |
剪切成形加工工艺.分类、细分类、术语和定义 |
Manufacturing processes forming under sheering conditions - Classification, subdivision, terms and definitions |
正常 |
DIN 8590-2003 |
切削操作加工工艺.分类、细分类、术语和定义 |
Manufacturing processes removal operations - Classification, subdivision, terms and definitions |
正常 |
DIN 8589-17-2003 |
排屑加工工艺.第17部分:滚筒抛光.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 17: Barrel polishing; Classification, subdivision, terms and definitions |
正常 |
DIN 8593-7-2003 |
连接加工工艺.第7部分:钎焊或铜焊连接.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 7: Joining by soldering or brazing; Classification, subdivision, terms and definitions |
正常 |
DIN 8583-5-2003 |
压力成形加工工艺.第5部分:压印成形.分类、细分类、术语和定义 |
Manufacturing processes forming under compressive conditions - Part 5: Indentation-forming; Classification, subdivision, terms and definitions |
正常 |
DIN 8583-3-2003 |
压力成形加工工艺.第3部分:自由成形.分类、细分类、术语和定义 |
Manufacturing processes forming under compressive conditions - Part 3: Free forming; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-7-2003 |
排屑加工工艺.第7部分:锉削.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 7: Filing, rasping; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-6-2003 |
排屑加工工艺.第6部分:锯切.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 6: Sawing; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-5-2003 |
排屑加工工艺.第5部分:拉削.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 5: Broaching; Classification, subdivision, terms and definitions |
正常 |
DIN 8584-4-2003 |
拉伸和加压成形加工工艺.第4部分:旋压.分类、细分类、术语和定义 |
Manufacturing processes forming under combination of tensile and compressive conditions - Part 4: Spinning; Classification, subdivision, terms and definitions |
正常 |
DIN 8583-2-2003 |
压力成形加工工艺.第2部分:轧制.分类、细分类、术语和定义 |
Manufacturing processes forming under compressive conditions - Part 2: Rolling; Classification, subdivision, terms and definitions |
正常 |
DIN 8583-1-2003 |
压力成形加工工艺.第1部分:分类、细分类、术语和定义 |
Manufacturing processes forming under compressive conditions - Part 1: General; Classification, subdivision, terms and definitions |
正常 |
DIN 8582-2003 |
成形加工工艺.分类.细分类、术语、定义和字母索引 |
Manufacturing processes forming - Classification; Subdivision, terms and definitions, alphabetical index |
正常 |
DIN 8589-2-2003 |
排屑加工工艺.第2部分:钻孔、钻沉头孔和锪沉头孔、铰孔.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 2: Drilling, countersinking and counterboring, reaming; Classification, subdivision, terms and definitions |
正常 |
DIN 8593-4-2003 |
连接加工工艺.第4部分:非晶材料的加工连接.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 4: Joining by processing of amorphous materials; Classification, subdivision, terms and definitions |
正常 |
DIN 8593-1-2003 |
连接加工工艺.第1部分:装配.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 1: Assembling; Classification, subdivision, terms and definitions |
正常 |
DIN 8585-3-2003 |
拉伸成形加工工艺.第3部分:膨涨成形.分类、细分类、术语和定义 |
Manufacturing processes forming under tensile conditions - Part 3: Bulge forming; Classification, subdivision, terms and definitions |
正常 |
DIN 8584-6-2003 |
拉伸和加压成形加工工艺.第6部分:反向膨涨成形.分类、细分类、术语和定义 |
Manufacturing processes forming under combination of tensile and compressive conditions - Part 6: Upset bulging; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-11-2003 |
排屑加工工艺.第11部分:用旋转工具研磨.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 11: Grinding with rotating tool; Classification, subdivision, terms and definitions |
正常 |
DIN 30912-1-1990 |
烧结金属材料.烧结指南.第1部分:烧结件的机加工 |
Sintered metal materials; sint-guide-lines; part 1: machining of sintered parts |
正常 |
DIN ISO 18436-2-2014 |
机器的工况监测和诊断. 人员的资格和评估要求. 第2部分: 振动状态监测和诊断 (ISO 18436-2-2014) |
Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 2: Vibration condition monitoring and diagnostics (ISO 18436-2:2014) |
正常 |
DIN 8588-2013 |
切断加工工艺. 分类, 细分类, 术语和定义 |
Manufacturing processes severing - Classification, subdivision, terms and definitions |
正常 |
DIN 8593-3-2003 |
连接加工工艺.第3部分:机械法连接.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 3: Joining by mechanical means; Classification, subdivision, terms and definitions |
正常 |
DIN 8593-2-2003 |
连接加工工艺.第2部分:填料.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 2: Filling; Classification, subdivision, terms and definitions |
正常 |
DIN 8593-0-2003 |
连接加工工艺.第0部分:总则.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 0: General; Classification, subdivision, terms and definitions |
正常 |
DIN 8592-2003 |
清理制造工艺.分类、细类、术语和定义 |
Manufacturing processes cleaning - Classification, subdivision, terms and definitions |
正常 |
DIN 8591-2003 |
拆卸制造工艺.分类、细类、定义 |
Manufacturing processes disassembling - Classification, subdivision, definitions |
正常 |
DIN 8589-15-2003 |
排屑加工工艺.第15部分:研磨.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 15: Lapping; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-13-2003 |
排屑加工工艺.第13部分:线性切削运动珩磨.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 13: Honing by linear cutting motion; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-9-2003 |
排屑加工工艺.第9部分:刮、凿.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 9: Scraping, chiseling; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-4-2003 |
排屑加工工艺.第4部分:刨削.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 4: Planing, shaping; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-3-2003 |
排屑加工工艺.第3部分:铣削.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 3: Milling; Classification, subdivision, terms and definitions |
正常 |
DIN 8589-1-2003 |
排屑加工工艺.第1部分:车削.分类、细分类、术语和定义 |
Manufacturing processes chip removal - Part 1: Turning; Classification, subdivision, terms and definitions |
正常 |
DIN 8585-2-2003 |
拉伸成形加工工艺.第2部分:拉伸减径.分类、细分类、术语和定义 |
Manufacturing processes under tensile conditions - Part 2: Stretch reducing; Classification, subdivision, terms and definitions |
正常 |
DIN 8586-2003 |
弯曲成形加工工艺.分类、细分类、术语和定义 |
Manufacturing processes forming by bending - Classification, subdivision, terms and definitions |
正常 |
DIN 8585-4-2003 |
拉伸成形加工工艺.第4部分:张拉成形.分类、细分类、术语和定义 |
Manufacturing processes forming under tensile conditions - Part 4: Stretch forming; Classification, subdivision, terms and definitions |
正常 |
DIN 8585-1-2003 |
拉伸成形加工工艺.第1部分:总则.分类、细分类、术语和定义 |
Manufacturing processes forming under tensile conditions - Part 1: General; Classification, subdivision, terms and definitions |
正常 |
DIN 8584-7-2003 |
在拉伸和加压复合条件下复合成形的制造工艺.第7部分:液压成形加宽.分类、细类、术语和定义 |
Manufacturing processes forming under combination of tensile and compressive conditions - Part 7: Hydroforming widening; Classification, subdivision, terms and definitions |
正常 |
DIN 8584-5-2003 |
拉伸和加压成形加工工艺.第5部分:凸缘拉延成形.分类、细分类、术语和定义 |
Manufacturing processes forming under combination of tensile and compressive conditions - Part 5: Forming by raising; Classification, subdivision, terms and definitions |
正常 |
DIN 8584-1-2003 |
拉伸和加压成形加工工艺.第1部分:总则.分类、细分类、术语和定义 |
Manufacturing processes forming under combination of tensile and compressive conditions - Part 1: General; Classification, subdivision, terms and definitions |
正常 |
DIN 8583-6-2003 |
压力成形加工工艺.第6部分:挤出.分类、细分类、术语和定义 |
Manufacturing processes forming under compressive conditions - Part 6: Extrusion; Classification, subdivision, terms and definitions |
正常 |
DIN 8583-4-2003 |
压力成形加工工艺.第4部分:模具成形.分类、细分类、术语和定义 |
Manufacturing processes forming under compressive conditions - Part 4: Die forming; Classification, subdivision, terms and definitions |
正常 |
DIN 8580-2003 |
加工工艺.术语和定义划分 |
Manufacturing processes - Terms and definitions, division |
正常 |
DIN 8593-8-2003 |
连接加工工艺.第8部分:粘接.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 8: Joining by means of adhesives; Classification, subdivision, terms and definitions |
正常 |
DIN 8593-6-2003 |
连接加工工艺.第6部分:焊接.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 6: Joining by welding; Classification, subdivision, terms and definitions |
正常 |
DIN 8593-5-2003 |
连接加工工艺.第5部分:成形工艺连结.分类、细分类、术语和定义 |
Manufacturing processes joining - Part 5: Joining by forming processes; Classification, subdivision, terms and definitions |
正常 |
NF E66-507-1985 |
却学和磨削的基本数值.力、能量和功率 |
Basic quantities in cutting and grinding. Forces, energy, power. |
正常 |
NF E66-506-1985 |
切削和磨削的基本数值.切削加工时几何和运动学数值 |
Basic quantities in cutting and grinding. Geometric and kinematic quantities in cutting. |
正常 |
GB/T 31210.2-2014 |
绿色制造 亚干式切削 第2部分:微量润滑系统技术要求 |
Green manufacturing.Near dry cutting.Part 2:Technical requirements for minimum quantity lubricating system |
正常 |
GB/T 31210.1-2014 |
绿色制造 亚干式切削 第1部分:通用技术要求 |
Green manufacturing.Near dry cutting.Part 1:General requirements |
正常 |
GB/T 31209-2014 |
绿色制造 低温冷风切削 技术要求 |
Green manufacturing.Technical requirements for cryogenic cold air cutting |
正常 |
GB/T 29796-2013 |
激光修复通用技术规范 |
Laser repairing general specification |
正常 |
GB/T 24737.9-2012 |
工艺管理导则.第9部分:生产现场工艺管理 |
Guide for technological management.Part 9:Technological management of production field |
正常 |
GB/T 24737.6-2012 |
工艺管理导则.第6部分:工艺优化与工艺评审 |
Guide for technological management.Part 6:Process optimization and review |
正常 |
GB/T 24737.4-2012 |
工艺管理导则.第4部分:工艺方案设计 |
Guide for technological management.Part 4:Design of process program |
正常 |
GB/T 24737.2-2012 |
工艺管理导则.第2部分:产品工艺工作程序 |
Guide for technological management.Part 2:Technological work procedure of products |
正常 |
GB/Z 28283-2012 |
热加工工艺仿真与模拟技术导则 |
Guide for simulation and modeling of thermal processing |
正常 |
GB/T 28282-2012 |
计算机辅助工艺设计.系统功能规范 |
Specification for function of computer aided process planning system |
正常 |
GB/T 28614-2012 |
绿色制造.干式切削.通用技术指南 |
Green manufacturing.Dry cutting.The general technique guideline |
正常 |
GB/T 28613-2012 |
机械产品绿色制造工艺规划.导则 |
Green manufacturing process planning of mechanical products.Guideline |
正常 |
GB 50735-2011 |
铁合金工艺及设备设计规范 |
Code for design of ferroalloy process and equipment |
正常 |
GB/T 22124.2-2010 |
面向装备制造业产品全生命周期工艺知识 第2部分:通用制造工艺分类编码规范 |
Equipment manufacturing oriented product life-cycle technology knowledge.Part 2:Coding regulation of general manufacturing technology classification |
正常 |
GB/T 26102-2010 |
计算机辅助工艺设计 导则 |
Guideline for computer aided process planning |
正常 |
GB/T 22124.3-2010 |
面向装备制造业产品全生命周期工艺知识 第3部分:通用制造工艺描述与表达规范 |
Equipment manufacturin oriented product life-cycle technology knowledge.Part 3:Description and representation specification of general manufacturing technology |
正常 |
GB/T 24738-2009 |
机械制造工艺文件完整性 |
Completeness of machine-building technological documentation |
正常 |
GB/T 24737.8-2009 |
工艺管理导则.第8部分:工艺验证 |
Guide for technological management.Part 8:Process verification |
正常 |
GB/T 24737.7-2009 |
工艺管理导则.第7部分:工艺定额编制 |
Guide for technological management.Part 7:Technological quota formulation |
正常 |
GB/T 24737.5-2009 |
工艺管理导则.第5部分:工艺规程设计 |
Guide for technological management.Part 5:Design of process procedure |
正常 |
GB/T 24737.3-2009 |
工艺管理导则.第3部分:产品结构工艺性审查 |
Guide for technological management.Part 3:Review of technological efficiency of product design |
正常 |
GB/T 4863-2008 |
机械制造工艺基本术语 |
General terminology of machine-building technology |
正常 |
GB/T 22124.1-2008 |
面向装备制造业.产品全生命周期工艺知识.第1部分:通用制造工艺分类 |
Equipment manufacturing oriented product life-cycle technology knowledge.Part 1:Classification of general manufacturing technology |
正常 |
GB 50962-2014 |
铜加工厂工艺设计规范 |
Code for design of copper processing plant |
正常 |
GB/T 24737.1-2012 |
工艺管理导则.第1部分:总则 |
Guide for technological management.Part 1:General |
正常 |
YB/T 036.17-1992(2009) |
冶金设备制造通用技术条件 机械加工件 |
|
正常 |
SJ/T 11123-1997(2017) |
专业工艺规程的编号 |
Number of professional procedure |
正常 |
QB/T 1588.3-1992(2009) |
轻工机械 装配通用技术条件 |
|
(作废) |
JB/Z 174-1982 |
机械加工工艺定位与夹紧符号 |
|
(作废) |
JJ 17-1983 |
建筑机械包装通用技术条件 |
|
(作废) |
JJ 16-1983 |
建筑机械涂漆通用技术条件 |
|
(作废) |
JJ 15-1983 |
建筑机械装配通用技术条件 |
|
(作废) |
JJ 14-1983 |
建筑机械机械加工件通用技术条件 |
|
(作废) |
JB/ZQ 4000.9-1986 |
装配通用技术要求 |
|
(作废) |
JB/ZQ 4000.2-1986 |
切削加工件通用技术要求 |
|
(作废) |
JB/T 7510-1994(2017) |
工艺参数优化方法 正交试验法 |
Technological parameter optimization method Orthogonal test method |
正常 |
JB/T 7537-1994(2017) |
工艺典型化导则 |
Guideline for techniques typification |
正常 |
JB/T 7701-1995 |
计算机辅助工艺规程设计(CAPP)导则 |
Guide rules for computer aided process planning (CAPP) |
(作废) |
JB/T 5061-1991 |
机械加工定位,夹紧符号 |
|
(作废) |
HB 7130-1995 |
切削加工通用技术条件 |
General technical conditions for cutting process |
正常 |
HB/Z 5125-1979 |
铝合金在碱性溶液中化学铣切工艺 |
|
(作废) |
HB 6589-1992 |
切削加工工艺用代号与符号 |
Codes and symbols for cutting process |
正常 |