QQ:543060174/327814406
| 咨询电话:010-61272284 400-090-1985
| 网址:http://www.stdbook.org
| E-MAIL:gwbz@263.net
|
标准号 |
中文名 |
英文名 |
状态 |
JB/T 10278-2001 |
气流干燥机 |
Flash dryers |
与工作人员确认 |
JB/T 10279-2001 |
滚筒干燥机 |
Cylinder dryer |
与工作人员确认 |
JB/T 10280-2001(2017) |
喷雾造粒流化床干燥机 |
Spray granulation fluidized-bed dryers |
与工作人员确认 |
JB/T 10350-2002 |
液体喷砂机 |
Wet blasting equipment |
与工作人员确认 |
JB/T 8695-1998 |
无气喷涂机 |
Airless spray unit |
与工作人员确认 |
JB/T 9091-1999 |
微、小型清洗机 |
Mini and small typed cleaning machine |
与工作人员确认 |
JB/T 8093-1999 |
高压水射流设备 |
High pressure water jet equipment |
与工作人员确认 |
MT/T 576-1996 |
液压支架立柱,千斤顶活塞和活塞杆用带支承环的密封沟槽型式,尺寸和公差 |
|
与工作人员确认 |
SN/T 0237-1993(2009) |
进口成套设备检验规程 |
Rules for the inspection of complete set of equipment or whole plant for import |
与工作人员确认 |
JC/T 1065-2007(2017) |
定速式摩擦试验机 |
|
与工作人员确认 |
WJ 2602-2002 |
火炮电动擦炮机通用规范 |
|
与工作人员确认 |
JB/T 10349-2013(2017) |
干式喷砂机 |
Dry blasting machine |
与工作人员确认 |
JB/T 10350-2013(2017) |
液体喷砂机 |
Wet blasting equipment |
与工作人员确认 |
JB/T 11366-2013(2017) |
机场跑道除胶设备 |
Airport runway rubber-removal cleaning vehicle |
与工作人员确认 |
JB/T 12211-2015(2017) |
喷砂房 |
|
与工作人员确认 |
GB/T 15168-1994 |
振动与冲击隔离器性能测试方法 |
|
与工作人员确认 |
GB/T 26221-2010 |
基于状态的维护系统体系结构 |
Condition-based maintenance system architecture |
与工作人员确认 |
UL SUBJECT 1204-2010 |
SUBJECT 1204 零部件清洗机调查大纲发布号:2 |
OUTLINE OF INVESTIGATION FOR PARTS CLEANERS (Issue 2) |
与工作人员确认 |
NF T35-101-2-2005 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第2部分:使用水基清洁液的机械安全 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2 : safety of machines using water based cleaning liquids. |
与工作人员确认 |
NF T35-101-3-2005 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第3部分:使用易燃清洁液体的机械的安全 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3 : safety of machines using flammable cleaning liquids. |
与工作人员确认 |
NF T35-101-4-2005 |
利用液体或蒸汽的工业产品的表面清洁和预处理机器.第4部分:利用卤化溶剂的机械安全 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 4 : safety of machines using halogenated solvents. |
与工作人员确认 |
NF C20-011-1980 |
受制于高温和湿度占主要因素的环境约束条件下的工业设备的设计,供应和利用率指南 |
Guide for design,supply,utilisation of industrial equipments which are submit to severe environmental contraints where heat and moisture are the most important |
与工作人员确认 |
NF T35-101-3-2009 |
使用液体或蒸汽的工业产品表面清洁和预处理用机器.第3部分:使用易燃清洁液体的机器安全性 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3 : safety of machines using flammable cleaning liquids. |
与工作人员确认 |
NF T35-101-2/IN1-2009 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第2部分:使用水基清洁液的机械安全性 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2 : safety of machines using water based cleaning liquids. |
与工作人员确认 |
NF T35-101-4-2009 |
使用液体或蒸汽的工业产品表面清洁和预处理用机器.第4部分:使用卤化溶剂的机器安全性 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 4 : safety of machines using halogenated solvents. |
与工作人员确认 |
DIN ISO 18129-2016 |
机器的工况监测和诊断.性能诊断方法(ISO 18129-2015) |
Condition monitoring and diagnostics of machines - Approaches for performance diagnosis (ISO 18129:2015) |
与工作人员确认 |
DIN EN 50176-2010 |
易燃液体涂料用固定静电喷涂设备.安全要求 |
Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements; German version EN 50176:2009 |
与工作人员确认 |
DIN EN 12921-1-2011 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第1部分:通用安全要求;德文版本EN 12921-1-2005+A1-2010 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements; German version EN 12921-1:2005+A1:2010 |
与工作人员确认 |
ASME PTC 1-2011 |
总规程 |
General Instructions (PTC 1 - 2011) |
与工作人员确认 |
ASME PTC 1-2015 |
总规程 |
General Instructions |
与工作人员确认 |
ASME PTC 46-1996 |
全部设备性能 |
Performance Test Code on Overall Plant Performance (PTC 46 - 1996) |
与工作人员确认 |
EN 12921-3-2008 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第3部分:使用易燃清洁液体的机械安全性.德文版本EN 12921-3-2005+A1-2008 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids; German version EN 12921-3:2005+A1:2008 |
与工作人员确认 |
EN 12921-1-2010 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第1部分:通用安全要求;德文版本EN 12921-1-2005+A1-2010 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements; German version EN 12921-1:2005+A1:2010 |
与工作人员确认 |
EN 50176-2009 |
易燃液体涂料用固定静电喷涂设备.安全要求 |
Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements; German version EN 50176:2009 |
与工作人员确认 |
BS CWA 15902-1-2008 |
娱乐业中舞台和其他演出区域用提升和承载设备.一般要求(不包括铝和钢架及塔) |
Lifting and load-bearing equipment for stages and other production areas within the entertainment industry - General requirements (excluding aluminium and steel trusses and towers) |
与工作人员确认 |
BS EN 13355-2004+A1-2009 |
涂覆设备.组合室.安全性要求 |
Coating plants - Combined booths - Safety requirements |
与工作人员确认 |
BS EN 12921-3-2005+A1-2008 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第3部分:使用易燃清洁液体的机械安全性 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines usingflammable cleaning liquids |
与工作人员确认 |
JB/T 6442-2013 |
高温、热水清洗机 |
High temperature、 hot water cleaning machine |
与工作人员确认 |
JB/T 9088-2013 |
往复式杂质泵 |
Reciprocating impurity pump |
与工作人员确认 |
JB/T 9091-2012 |
微、小型清洗机 |
Mini and small type cleaning machine |
与工作人员确认 |
JB/T 12211-2015 |
喷砂房 |
Sand Blasting room |
与工作人员确认 |
JB/T 12212-2015 |
双组分无气喷涂机 |
Two components airless spraying unit |
与工作人员确认 |
JB/T 12213-2015 |
水电站技术供水可调式射流泵装置 |
Adjustable injector pump equipment for technical water supply of hydropower station |
与工作人员确认 |
ASME PTC 46-2015 |
全部设备性能 |
Overall Plant Performance |
与工作人员确认 |
GB/T 26136-2018 |
超高压水切割机 |
Ultra-high pressure waterjet cutting machine |
与工作人员确认 |
GB/T 37916-2019 |
小型电动高压清洗机安全规范 |
|
与工作人员确认 |
JB/T 13891-2020 |
泵用小型电动机转子自动加工生产线 |
|
与工作人员确认 |
JB/T 13892-2020 |
电泵自动装配生产线 |
|
与工作人员确认 |
JB/T 8526-1997 |
高压水射流清洗作业安全规范 |
|
与工作人员确认 |
JB/T 8914-1999 |
管磨机 |
Tube mill |
与工作人员确认 |
SHJ 515-1990 |
大型设备吊装工程施工工艺标准 |
|
与工作人员确认 |
JB/T 9091-2012(2017) |
微、小型清洗机 |
Mini and small type cleaning machine |
与工作人员确认 |
JB/T 8695-2012(2017) |
无气喷涂机 |
Airless spray unit |
与工作人员确认 |
JB/T 9088-2013(2017) |
往复式杂质泵 |
Reciprocating impurity pump |
与工作人员确认 |
JB/T 6442-2013(2017) |
高温、热水清洗机 |
High temperature、hot water cleaning machine |
与工作人员确认 |
JB/T 12212-2015(2017) |
双组分无气喷涂机 |
|
与工作人员确认 |
JB/T 12213-2015(2017) |
水电站技术供水可调式射流泵装置 |
|
与工作人员确认 |
JB/T 12491-2015(2017) |
喷射设备名词术语 |
|
与工作人员确认 |
JB/T 12492-2015(2017) |
连铸用水喷嘴 |
|
与工作人员确认 |
JB/T 12493-2015(2017) |
连铸用气水喷嘴 |
|
与工作人员确认 |
JB/T 12494-2015(2017) |
热轧用除鳞喷嘴 |
|
与工作人员确认 |
JB/T 12495-2015(2017) |
电站空冷机组清洗装置 |
|
与工作人员确认 |
GB/T 26135-2010 |
高压清洗机 |
High Pressure cleaning unit |
与工作人员确认 |
GB/T 26136-2010 |
超高压水切割机 |
Ultra-high pressure waterjet cutting machine |
与工作人员确认 |
GB 26148-2010 |
高压水射流清洗作业安全规范 |
Safety specification for the use of manually operated high pressure waterjet equipment |
与工作人员确认 |
GB/T 26148-2010 |
高压水射流清洗作业安全规范 |
Safety specification for the use of manually operated high pressure waterjet equipment |
与工作人员确认 |
UL SUBJECT 2422-2006 |
商用紫外线固化设备调查大纲.发布编号:2 |
Outline of Investigation for Ultraviolet Curing Equipment for Commercial Use (Issue 2) |
与工作人员确认 |
NF X50-790-1995 |
工业清洗服务.清洗专业词汇 |
Industrial cleaning services. Lexicon on cleanliness. |
与工作人员确认 |
NF T35-101-2-2009 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第2部分:使用水基清洁液的机械安全性 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2 : safety of machines using water based cleaning liquids. |
与工作人员确认 |
NF C23-577-2009 |
可燃性涂层粉末用固定式静电应用设备.安全性要求 |
Stationary electrostatic application equipment for ignitable coating powder - Safety requirements. |
与工作人员确认 |
NF T35-015/IN1-2010 |
涂覆设备.有机液体涂覆材料的浸渍涂覆和电镀用机械.安全性要求 |
Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements. |
与工作人员确认 |
NF T35-205-1/IN1-2010 |
涂层材料用搅拌机械.安全性要求.第1部分:车辆表面整修用的搅拌机械 |
Mixing machinery for coating materials - Safety requirements - Part 1 : mixing machinery for use in vehicle refinishing. |
与工作人员确认 |
NF T35-205-1-2010 |
涂层材料用搅拌机械.安全性要求.第1部分:车辆表面整修用的搅拌机械 |
Mixing machinery for coating materials - Safety requirements - Part 1 : mixing machinery for use in vehicle refinishing. |
与工作人员确认 |
NF T35-011-2009 |
涂覆车间.有机粉末涂层材料施涂用喷柜的安全要求 |
Coating plants - Spray booths for application of organic powder coating material - Safety requirements. |
与工作人员确认 |
DIN EN 12921-3-2010 |
使用液体或蒸气的工业产品的表面清洁和预处理机器.第3部分:使用易燃清洁液体的机械安全性.德文版本EN 12921-3-2005+A1-2008 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids; German version EN 12921-3:2005+A1:2008 |
与工作人员确认 |
DIN EN 12757-1-2011 |
涂层材料用搅拌机械.安全性要求.第1部分:车辆表面整修用的搅拌机械.德文版本EN 12757-1-2005+A1-2010 |
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing; German version EN 12757-1:2005+A1:2010 |
与工作人员确认 |
DIN EN 13771-2-2017 |
制冷用压缩机和冷凝装置.性能测试和试验方法.第2部分:冷凝装置;德文版本EN 13771-2-2017 |
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units; German version EN 13771-2:2017 |
与工作人员确认 |
ANSI/ASHRAE 134-2005 |
加热、通风、空调和制冷系统用图形符号 |
Graphic Symbols for Heating, Ventilating, Air-Conditioning, and Refrigerating Systems (Includes Access to Additional Content) |
与工作人员确认 |
EN 12757-1-2010 |
涂层材料用搅拌机械.安全性要求.第1部分:车辆表面整修用的搅拌机械.德文版本EN 12757-1-2005+A1-2010 |
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing; German version EN 12757-1:2005+A1:2010 |
与工作人员确认 |
EN 13771-2-2017 |
制冷用压缩机和冷凝装置.性能测试和试验方法.第2部分:冷凝装置;德文版本EN 13771-2-2017 |
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units; German version EN 13771-2:2017 |
与工作人员确认 |
BS CWA 15902-2-2008 |
娱乐业中舞台和其他演出区域用提升和承载设备.设计、制造和铝和钢架及塔使用的规范 |
Lifting and load-bearing equipment for stages and other production areas within the entertainment industry - Specifications for design, manufacture and for use of aluminium and steel trusses and towers |
与工作人员确认 |
BS EN 12621-2006+A1-2010 |
压力下覆层材料的供应和循环用机器.安全性要求 |
Machinery for the supply and circulation of coating materials under pressure.Safety requirements |
与工作人员确认 |
JB/T 8695-2012 |
无气喷涂机 |
Airless spray unit |
与工作人员确认 |
JB/T 12491-2015 |
喷射设备名词术语 |
Terminology for jet equipment |
与工作人员确认 |
JB/T 12492-2015 |
连铸用水喷嘴 |
Water nozzle for Continuous casting |
与工作人员确认 |
JB/T 12493-2015 |
连铸用气水喷嘴 |
Air & water spraying nozzle for continuous casting |
与工作人员确认 |
JB/T 12494-2015 |
热轧用除鳞喷嘴 |
Descaling nozzle for hot rolling |
与工作人员确认 |
JB/T 12495-2015 |
电站空冷机组清洗装置 |
Cleaning devices for power plant air cooling condenser units |
与工作人员确认 |
UL SUBJECT 1204-2017 |
零部件清洗机调查大纲 |
Outline of Investigation for Parts Cleaners (Issue 3) |
与工作人员确认 |
GB/T 26135-2020 |
高压清洗机 |
High Pressure cleaning unit |
与工作人员确认 |
JB/T 13759-2019 |
转炉炼钢用氧枪 |
|
与工作人员确认 |