进口原版 ASTM E112 测定平均晶料度的标准评级图 共有18张图,其中,卷图5张,透明物:13张图 请注意:这个价格是全套的。有关各个卷,请参见下文。
这些测定金属材料平均晶粒尺寸的方法主要是测量程序,由于其纯粹的几何基础,与相关的金属或合金无关。实际上,基本程序也可用于估算非金属材料中的平均晶粒、晶体或单元尺寸。如果材料的结构接近标准比较图的外观,则可以使用比较法。截距法和平面法通常适用于测定平均晶粒尺寸。成套提供,也可以单独购买组件。
要购买单个组件,请从下面选择项目:
Please Note: This price is for the complete set. For Individual Volumes, see below.
These methods of determination of average grain size in metallic materials are primarily measuring procedures and, because of their purely geometric basis, are independent of the metal or alloy concerned. In fact, the basic procedures may also be used for the estimation of average grain, crystal, or cell size in nonmetallic materials. The comparison method may be used if the structure of the material approaches the appearance of one of the standard comparison charts. The intercept and planimetric methods are always applicable for determining average grain size. Available as a complete set or you can purchase components individually.
To purchase individual components, select item from below:
E112测定平均粒径的附加方法—全套透明胶片(图版1A和1B)(00到10) E112测定平均晶粒度方法的附属物——板I、II、III、IV的组合 E112测定平均粒径方法的附件——粒径6.0、6.5、7.0(8.5 x 11) E112测定平均晶粒度方法的附件——晶粒度9.0、9.5、10.0(8.5 x 11) E112测定平均晶粒度方法的附件晶粒度00(8.5 x 11) E112测定平均晶粒度方法的附件晶粒度0(8.5x 11) E112测定平均晶粒度方法的附件晶粒度1.0(8.5 x 11) E112平均晶粒度测定方法的附件晶粒度2.0(8.5 x 11) E112平均晶粒度测定方法的附属物板II(16W×21L) E112平均晶粒度测定方法的附属物——板IV(15.5W x 17.5L) E112测定平均晶粒度方法的附件——晶粒度3.0、3.5、4.0(8.5 x 11) E112测定平均晶粒度方法的附件晶粒度0.5(8.5 x 11) E112测定平均粒径方法的附件——粒径4.5、5.0、5.5(8.5 x 11) E112平均粒径测定方法的附属物——粒径7.5、8.0、8.5(8.5×11) E112测定平均晶粒度方法的附件——图5(8W×10L) E112测定平均晶粒度方法的附件晶粒度1.5(8.5 x 11) E112平均晶粒度测定方法的附件晶粒度2.5(8.5 x 11) E112测定平均晶粒度方法的附属物——板1A和1B(36W x 18L) E112平均晶粒度测定方法的附属物—板III(16W×21L)
Adjunct to E112 Methods for Determining the Average Grain Size -- Complete Set of All Transparencies (Plate 1A and 1B) (00 through 10) Adjunct to E112 Methods for Determining the Average Grain Size -- Combination of Plates I, II, III, IV Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 6.0, 6.5, 7.0 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 9.0, 9.5, 10.0 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 00 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 0 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 1.0 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 2.0 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Plate II (16W x 21L) Adjunct to E112 Methods for Determining the Average Grain Size -- Plate IV (15.5W x 17.5L) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 3.0, 3.5, 4.0 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 0.5 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 4.5, 5.0, 5.5 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 7.5, 8.0, 8.5 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Figure 5 (8W x 10L) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 1.5 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 2.5 (8.5 x 11) Adjunct to E112 Methods for Determining the Average Grain Size -- Plate 1A and 1B (36W x 18L) Adjunct to E112 Methods for Determining the Average Grain Size -- Plate III (16W x 21L)
|