电话: 400-090-1985/010-61272284 注册/登陆 | 购物车 | 标准化动态标准知识政策法规

网站首页
翻译版标准查询
标准查询
网上书店
分类查询标准  │  进口原版展示  │  翻译成果:中国标准英文版/外国标准中文版  │  数据库共享  │  公益下载  │  标准公告  │  本站资讯│ 在线咨询
站内搜索 高级搜索
热门搜索词:
 网站首页 >> 本站资讯 
 本站资讯 Notice  
 
进口正版《AWS A5.32M/A5.32-2021 Welding Consumables—Gases and Gas Mixtures for Fusion Welding and Allied Processes》

进口正版《AWS A5.32M/A5.32-2021 Welding Consumables—Gases and Gas Mixtures for Fusion Welding and Allied Processes》

Description / Abstract:

AWS A5.32M/A5.32, 3rd Edition, 2021 - Welding Consumables—Gases and Gas Mixtures for Fusion Welding and Allied Processes

This standard specifies requirements for the classification of gases and gas mixtures that chemically shield or chemically react with the filler material, base metal, and weld metal, and are used in fusion welding and allied processes including, but not limited to:

(1) gas tungsten arc welding—GTAW

(2) gas metal arc welding—GMAW

(3) flux cored arc welding—FCAW

(4) plasma arc welding—PAW

(5) plasma arc cutting—PAC

(6) plasma arc gouging—PAG

(7) laser beam welding—LBW

(8) laser beam cutting—LBC

(9) arc braze welding—ABW

(10) electrogas welding—EGW

The purpose of this standard is to classify and designate these gases and gas mixtures in accordance with their chemical properties and metallurgical behavior as the basis for correct selection by the user and to simplify the possible qualification procedures. The modes of application for gas shielded welding processes include, but are not limited to: manual, semiautomatic, mechanized, and automatic weld methods.

Gas purities and mixing tolerances are specified as delivered by the supplier (manufacturer) and not at the point of use.

Gases or gas mixtures may be supplied in either liquid or gaseous form, but when used for welding and allied processes, the gases are always used in the gaseous form.

Fuel gases, such as acetylene, natural gas, propane, etc., and resonator gases, as used in gas lasers, are not covered by this standard.

Transportation and handling of gases and containers shall be in accordance with local, national, and regional standards and regulations as required.

The gases covered by this specification are classified using a system that is independent of U.S. Customary Units and the International System of Units (SI). Classification is according to the composition of the gas or gas mixture.

Safety and health issues and concerns are beyond the scope of this standard and, therefore, are not fully addressed herein. Some safety and health information can be found in Annex Clauses A5 and A8.

Safety and health information is available from the following sources:

American Welding Society:

(1) ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes

(2) AWS Safety and Health Fact Sheets

(3) Other safety and health information on the AWS website

Material or Equipment Manufacturers:

(1) Safety Data Sheets supplied by materials manufacturers

(2) Operating Manuals supplied by equipment manufacturers

Applicable Regulatory Agencies

Work performed in accordance with this standard may involve the use of materials that have been deemed hazardous and may involve operations or equipment that may cause injury or death. This standard does not purport to address all safety and health risks that may be encountered. The user of this standard should establish an appropriate safety program to address such risks as well as to meet applicable regulatory requirements. ANSI Z49.1 should be considered when developing the safety program.

Product Details:

  • Revision: 3rd Edition, 2021
  • Published Date: January 2021
  • Status: Active, Most Current
  • Document Language: English
  • Published By: American Welding Society, Inc. (AWS)
  • Page Count: 40

 

站内搜索 高级搜索
热门搜索词:
购买方式
线下订购
会员服务
会员服务
数据更新
增值服务
付款方式
支付宝(微信)付款
对公转帐
工商银行
建设银行
农业银行
邮局汇款
发货方式
配送及资费
检索帮助
站内检索
售后服务
退换货原则
帮助中心
签收注意事项
乘车/自驾路线
京ICP备案信息

| 企业资质 | 联系我们 |

客服专线:400-090-1985 13341091871 E-mail:543060174@QQ.com;
QQ:543060174(兼微信) / 327814406

Copyright 2009~2035 Beijing Zhong Pu Ke Biao Books Co., Ltd All Rights Reserved
北京中普科标图书有限责任公司 版权所有
工作时间:星期一~星期五 早:9:00至晚5:30
正版API ASME ASTM ISO NACE BS DIN IEC UL NFPA标准查阅:http://www.stdbook.cn
京ICP备11006165号 / 京公网安备11011502002443 / 新出发京零字第大070032号