|
往复式内燃交流发电机组.第9部分:机械振动的测量和评定
Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
参考页数：12P.;A4
|
|
|
|
|
|
机械振动. 机械振动的测量和评估. 第2部分：陆基燃气轮机、蒸汽轮机和超过40mw的发电机，带有油膜轴承，额定转速为1500 r / min、1800 r / min、3000 r / min和3600 r / min
Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
参考页数：23P.;A4
|
|
|
|
|
|
旋转式和往复式机器的机械振动 对测量振动烈度仪器的要求
Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
参考页数：13P;A4
|
|
|
|
|
|
机械振动.通过非转动件的测量进行机械振动的评估.第3部分:现场测量时标称功率为15kW和标称速度为120r/min～15000r/min的工业机械
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
参考页数：12P;A4
|
|
|
|
|
|
机械振动与冲击 机械系统冲击阻抗的评定分析方法 提供者和分析使用者之间的信息交换
Mechanical vibration and shock; analytical methods of assessing shock resistance of mechanical systems; information exchange between suppliers and users of analyses
参考页数：5P.;A4
|
|
|
|
|
|
工业风机.平衡质量和振动等级规范
Industrial fans - Specifications for balance quality and vibration levels
参考页数：39P.;A4
|
|
|
|
|
|
工业风扇.风扇振动的测量方法.技术勘误1
Industrial fans - Method of measurement of fan vibration; Technical Corrigendum 1
参考页数：2P.;A4
|
|
|
|
|
|
机械振动.通过在非旋转部件上测量评估机器振动.第7部分:包括在旋转轴上测量的工业设施用旋转动力泵
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
参考页数：17P;A4
|
|
|
|
|
|
机械振动.通过转轴的测量对机械振动进行评估.第3部分:耦合工业机器
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines
参考页数：7P;A4
|
|
|
|
|
|
振动和冲击传感器校准方法.第21部分:与参考传感器进行比对的振动校准.技术勘误1
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer; Technical Corrigendum 1
参考页数：3P;A4
|
|
|
|
|
