|
ISO一般用途螺纹 基本牙型 第2部分:英制螺纹
ISO general purpose screw threads - Basic profile - Part 2: Inch screw threads
参考页数:4P.;A4
|
|
|
|
|
|
ISO英制螺纹 直径与螺距系列及螺钉、螺栓和螺母的选用系列 直径范围0.06英寸~6英寸
ISO inch screw threads; General plan and selection for screws, bolts and nuts; Diameter range 0,06 to 6 in
参考页数:5P;A4
|
|
|
|
|
|
ISO英制螺钉螺纹.基本尺寸
ISO inch screw threads - Basic dimensions
参考页数:14P;A4
|
|
|
|
|
|
ISO英制螺纹 允差和公差
ISO inch screw threads; allowances and tolerances
参考页数:16P.;A4
|
|
|
|
|
|
螺纹根部和收尾规范.第1部分:英制螺纹
Undercuts and runouts for screw threads - Inch screw threads
参考页数:16P.;A4
|
|
|
|
|
|
统一标准螺纹.第3部分:直径小于1/4 in的螺纹.要求
Unified screw threads - Part 3:Screw threads with diameters below 1/4 in - Requirements
参考页数:24P.;A4
|
|
|
|
|
|
统一标准螺纹.第1部分:直径1/4 in及更大的螺纹.要求
Unified screw threadsPart 1: Screw threads withdiameters 1/4 in and larger –Requirements
参考页数:118P.;A4
|
|
|
|
|
|
螺纹规限值和公差.惠氏螺纹和B.A.螺纹牙样的螺纹规用规范
Screw gauge limits andtolerances –Part 2: Specification for gauges forscrew threads of Whitworth and B.A.forms
参考页数:42P.;A4
|
|
|
|
|
|
惠氏螺纹牙样的平行螺纹.要求
Parallel screw threads ofWhitworth form –Requirements
参考页数:66P.;A4
|
|
|
|
|
|
ISO普通螺纹.基本外形.第1部分:英制螺纹
ISO general purpose screw threads - Basic profile - Inch screw threads
参考页数:10P.;A4
|
|
|
|
|