|
螺距为 7mm 的带间隙和直侧面的圆螺纹.第2部分:螺纹极限尺寸和螺纹量规的允许偏差和允许磨损
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
参考页数：2P.;A4
|
|
|
|
|
|
螺距为 7mm 的带间隙和直侧面的圆螺纹.第1部分:公称尺寸
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Nominal Dimensions
参考页数：1P.;A4
|
|
|
|
|
|
螺距为7mm 的带公差和斜侧面的圆螺纹.螺纹的极限尺寸及螺纹量规的允许偏差和允许磨损量
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
参考页数：2P.;A4
|
|
|
|
|
|
螺距为7mm 的带间隙和直侧面的圆螺纹.标称尺寸
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions
参考页数：1P.;A4
|
|
|
|
|
|
气瓶.连接气瓶阀的平行螺纹.第1部分:规格(ISO 15245-1-2001+Amd 1-2013).德文版本EN ISO 15245-1-2001+A1-2013
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013); German version EN ISO 15245-1:2001 + A1:2013
参考页数：15P.;A4
|
|
|
|
|
|
主要用于塑料容器的螺纹.第2部分:梯形螺纹尺寸规格
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
参考页数：6P;A4
|
|
|
|
|
|
有轨车辆用工件上的螺纹测量.圆螺纹、爱克米梯形螺纹、圆梯形螺纹
Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
参考页数：2P.;A4
|
|
|
|
|
|
自行车.用于中接头装配的螺纹(ISO 6696-1989)
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
参考页数：13P.;A4
|
|
|
|
|
|
自行车.自行车前叉上用于装配前叉合件的螺纹(ISO 8488-1986)
Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
参考页数：14P.;A4
|
|
|
|
|
|
气瓶.气瓶阀门连接用17E和25E椎管螺纹.第1部分:规格
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2010 + Cor. 2:2012); German version EN ISO 11363-1:2010 + AC:2012
参考页数：15P;A4
|
|
|
|
|
