|
螺纹上有压力密封接缝的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸、公差和名称与符号
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation;English version of DIN EN 10226-2
参考页数：13P.;A4
|
|
|
|
|
|
储气瓶.连接储气瓶阀门的平行螺纹.第2部分:量规检验 (ISO 15245-2:2001); 德文版本 EN ISO 15245-2:2001
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
参考页数：12P.;A4
|
|
|
|
|
|
螺纹上有压力密封接缝的管螺纹.第3部分:通过极限量规验证
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
参考页数：38P.;A4
|
|
|
|
|
|
非螺纹密封连接管螺纹.第2部分:极限量规检定
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
参考页数：20P.;A4
|
|
|
|
|
|
非螺纹密封连接管螺纹.第1部分:尺寸、公差和命名
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
参考页数：11P.;A4
|
|
|
|
|
|
显微镜物镜螺纹
Microscope Objective Thread
参考页数：
|
|
|
|
|
|
60°管端螺纹.一般用途
Pipe Threads@ 60 deg@ General Purpose
参考页数：32P.;A4
|
|
|
|
|
|
显微镜物镜螺纹
Microscope Objective Thread (Errata - July 1972)
参考页数：12P.;A4
|
|
|
|
|
|
螺纹.五级干涉配合.配合螺纹
Class 5 Interference-Fit Thread
参考页数：74P.;A4
|
|
|
|
|
|
干密封管螺纹的测量(英制)
Gaging for Dryseal Pipe Threads (Inch)
参考页数：72P.;A4
|
|
|
|
|
