|
Aerospace series - Sensor based clamp load determination / high tensile bolts - Technical specification; German and English version EN 4859:2019
参考页数:44P.;A4
|
|
|
|
|
|
航空航天 同义术语表 第3部分:航空航天用螺栓和螺母 三种语言版
Aerospace - List of equivalent terms - Part 3: Aerospace bolts and nuts
参考页数:36P.;A4
|
|
|
|
|
|
航空航天.内置的十字形有棱纹的驱动器.公制系列;技术勘误表1
Aerospace - Drives, internal, cruciform, ribbed - Metric series; Technical Corrigendum 1
参考页数:2P;A4
|
|
|
|
|
|
航空航天系列.强度等级1100 MPa、带MJ螺纹的合金钢螺栓.采购规范
Aerospace - Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa - Procurement specification
参考页数:21P;A4
|
|
|
|
|
|
航空航天系列.内部六叶形轮驱动.米制系列
Aerospace - Internal six-lobe drives - Metric series
参考页数:6P.;A4
|
|
|
|
|
|
航空航天系列.强度等级小于或等于1100 MPa、金属材料制的、有涂覆或未涂覆、标称杆、短和中等长度MJ螺纹、内部偏移十字形肋状或非肋状驱动的100°异径埋头螺钉.尺寸
Aerospace - Screws, 100° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
参考页数:9P.;A4
|
|
|
|
|
|
航空航天系列.强度等级1250MPa~1800MPa、有涂层或无涂层、金属材料制成的、标称杆、短或中等长度MJ螺纹、双六角头螺栓.尺寸
Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions
参考页数:9P.;A4
|
|
|
|
|
|
航空航天系列.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成、短或中等长度MJ螺纹、标称杆、普通12角头螺栓.尺寸
Aerospace - Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
参考页数:9P.;A4
|
|
|
|
|
|
航空航天系列.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成、短或中等长度MJ螺纹、标称杆、普通六角头螺栓.尺寸
Aerospace - Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
参考页数:9P.;A4
|
|
|
|
|
|
航空航天系列.强度等级小于或等于1100MPa、金属材料制成、有涂层或无涂层、带有短或中等长度MJ螺纹、标称杆、内部偏移十字形肋状或非肋状驱动的100°标称埋头螺钉.尺寸
Aerospace - Screws, 100° normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
参考页数:9P.;A4
|
|
|
|
|
|
|