|
用于增强或修复聚乙烯煤气压力管上爆裂或破洞的全环绕型带夹紧装置的选择和使用的标准指南
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
参考页数:3P.;A4
|
|
|
|
|
|
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
参考页数:3P.;A4
|
|
|
|
|
|
刚性管吊架的设计和安装的标准实施规程
Standard Practice for Design and Installation of Rigid Pipe Hangers
参考页数:13P.;A4
|
|
|
|
|
|
用于增强或修复聚乙烯煤气压力管上爆裂或破洞的全环绕型带夹紧装置的选择和使用的标准指南
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
参考页数:3P.;A4
|
|
|
|
|
|
型锻, 焊接, 锻制松紧螺纹扣的标准规格
Standard Specification for Turnbuckles, Swaged, Welded, Forged
参考页数:10P.;A4
|
|
|
|
|
|
刚性管吊架的设计和安装的标准实施规程
Standard Practice for Design and Installation of Rigid Pipe Hangers
参考页数:13P.;A4
|
|
|
|
|
|
型锻, 焊接, 锻制松紧螺纹扣的标准规格
Standard Specification for Turnbuckles, Swaged, Welded, Forged
参考页数:10P.;A4
|
|
|
|
|
|
托盘连接件的试验方法 第1部分:托盘用钉子、其他榫钉型紧固件和U形钉的抗弯试验
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
参考页数:6P;A4
|
|
|
|
|
|
托盘连接件的试验方法 第2部分:托盘用钉子和U形钉的抗拉试验
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples
参考页数:10P.;A4
|
|
|
|
|
|
一般用途钢丝绳套环 规范
General purpose thimbles for use with steel wire ropes; Specification
参考页数:3P;A4
|
|
|
|
|