|
塑料管道系统.未增塑聚(氯乙烯)(PVC-U)管件、配件和材料.基于总氯含量的 PVC 含量的评估方法
Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content.
参考页数：7P.;A4
|
|
|
|
|
|
塑料管道系统.塑料部件.尺寸测定
Plastics piping systems - Plastics components - Measurement of dimensions.
参考页数：26P.;A4
|
|
|
|
|
|
塑料管道系统.玻璃纤维增强式热固性塑料管件和配件.回归分析及其使用方法
Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use.
参考页数：36P.;A4
|
|
|
|
|
|
塑料管道和导管系统.压力管道系统用注模热塑配件.用压碎法测定最大变形的试验方法
Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.
参考页数：7P.;A4
|
|
|
|
|
|
塑料管道系统.压力管道用溶剂-水泥胶合接头的注模承窝配件
Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.
参考页数：6P.;A4
|
|
|
|
|
|
塑料管道系统.聚乙烯放液 T 形管.组装放液 T 形管耐冲击的试验方法
Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee.
参考页数：7P.;A4
|
|
|
|
|
|
非气态液压力下传送用未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和/或双轴向聚氯乙烯(PVC-BO)制成的塑料管道系统.设计规则和元件的选择
Plastics piping systems made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and/or biaxial oriented poly(vinyl chloride) (PVC-BO) for conveyance under pressure of non gaseous fluids - Design rules, selection of components.
参考页数：53P.;A4
|
|
|
|
|
|
塑料管道系统.热水和冷水用热塑件和相关配件.接头耐压力循环的试验方法
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling.
参考页数：7P.;A4
|
|
|
|
|
|
塑料管道系统.冷热水输送用热塑性管和配件.安装组件温度循环试验方法
Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to tempetarure cycling.
参考页数：8P.;A4
|
|
|
|
|
|
塑料管道系统.玻璃纤维增强式热固塑料管件和配件.挠曲条件下部件内部耐化学侵蚀性的测定
Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition.
参考页数：12P.;A4
|
|
|
|
|
