|
用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第2部分:重型(S系列)螺柱端头的尺寸、设计、试验方法和技术要求
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
参考页数：11P;A4
|
|
|
|
|
|
用于液压流体传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第1部分:带锪孔沟槽中装有O形密封圈的油口
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
参考页数：6P;A4
|
|
|
|
|
|
液压传动和通用金属管连接件.第2部分:37°扩口管接头
Metallic tube connections for fluid power and general use - Part 2: 37° flared connectors
参考页数：56P.;A4
|
|
|
|
|
|
液压传动 用于压力为20 MPa(200 bar)～31.5 MPa(315 bar)的平面对接型快速接头 规范
Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications
参考页数：5P.;A4
|
|
|
|
|
|
液压传动.在20MPa(200巴)至31.5MPa(315巴)压力下使用的平面对接型快速接头.规范.修改件1
Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications; Amendment 1
参考页数：1P.;A4
|
|
|
|
|
|
气压传动 连接 气口和双头螺栓端
Pmeumatic fluid power - Connections - Portsand and stud ends
参考页数：13P.;A4
|
|
|
|
|
|
液压传动和通用联接件.软管接头.第2部分:带ISO 8434-1 O形圈24?锥形末端的软管接头
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
参考页数：13P.;A4
|
|
|
|
|
|
气压传动.连接.气口和双头螺栓端.修改件1
Pneumatic fluid power - Connections - Ports and stud ends; Amendment 1
参考页数：16P.;A4
|
|
|
|
|
|
橡胶和塑料软管组件 液压脉冲弯曲试验(半Ω 型试验)
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test)
参考页数：4P.;A4
|
|
|
|
|
|
液压传动 快换接头 第2部分:试验方法
Hydraulic fluid power - Quick-action couplings - Part 2: Test methods
参考页数：22P.;A4
|
|
|
|
|
