|
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution
参考页数：4P;A4
|
|
|
|
|
|
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第6部分:通过测量电导率测定水溶性杂质
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
参考页数：3P;A4
|
|
|
|
|
|
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第4部分:通过玻璃载片试验评定硬度
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test
参考页数：3P;A4
|
|
|
|
|
|
涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第1部分:抽样
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
参考页数：5P;A4
|
|
|
|
|
|
涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗
Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning
参考页数：4P.;A4
|
|
|
|
|
|
涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部去除原有涂层后钢材的除锈等级
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
参考页数：164P;A4
|
|
|
|
|
|
涂料和相关产品使用前钢衬底的制备.表面清洁度的目测评估.第1部分:未涂覆钢衬底和彻底清除原有涂层后钢衬底的锈蚀等级和制备等级
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
参考页数：88P;A4
|
|
|
|
|
|
涂覆油漆和相关产品前钢材的预处理.表面清洁度的评定试验.第6部分:提取分析用可溶性杂质.Bresle法
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method
参考页数：7P;A4
|
|
|
|
|
|
涂料和有关产品涂覆之前钢基片的制备.表面清洁度的目视评估.第4部分:与高压水冲法有关的初始表面条件、制备级别和闪锈级别
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
参考页数：50P;A4
|
|
|
|
|
|
涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐浊度测定的现场方法
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
参考页数：5P;A4
|
|
|
|
|
