|
钴, 铜, 钨和铁粉还原性气氛质量损失(氢损失)的标准试验方法
Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
参考页数：3P.;A4
|
|
|
|
|
|
采用阿基米德法测定压实或烧结粉末冶金(PM)产品密度的标准试验方法&x2019;原则
Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes&x2019; Principle
参考页数：7P.;A4
|
|
|
|
|
|
用霍尔流量计漏斗测定自由流动金属粉末表观密度的标准试验方法
Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
参考页数：4P.;A4
|
|
|
|
|
|
孔隙度小于2%的粉末冶金(PM)材料密度的标准试验方法
Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
参考页数：5P.;A4
|
|
|
|
|
|
用霍尔流量计漏斗测定金属粉末流速的标准试验方法
Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
参考页数：4P.;A4
|
|
|
|
|
|
采用阿基米德法测定烧结粉末冶金(PM)产品中油含量, 油浸效率和表面连接孔隙度的标准试验方法&x2019;原则
Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes&x2019; Principle
参考页数：6P.;A4
|
|
|
|
|
|
采用光散射法测定金属粉末和相关化合物粒径分布的标准试验方法
Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
参考页数：4P.;A4
|
|
|
|
|
|
粉末冶金 (PM) 产品表面抛光的标准试验方法
Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
参考页数：3P.;A4
|
|
|
|
|
|
硬质合金横向断裂强度的标准试验方法
Standard Test Method for Transverse Rupture Strength of Cemented Carbides
参考页数：3P.;A4
|
|
|
|
|
|
使用微压痕硬度测量法测定黑色粉末冶金 (PM) 部件的有效硬化层深度的标准试验方法
Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
参考页数：4P.;A4
|
|
|
|
|
