|
螺纹上有压力密闭接缝的管螺纹.第1部分:尺寸、公差和标志.技术勘误1
Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation; Technical Corrigendum 1
参考页数:2P.;A4
|
|
|
|
|
|
十字槽盘头自钻自攻螺钉
Cross recessed pan head drilling screws with tapping screw thread
参考页数:4P;A4
|
|
|
|
|
|
用螺纹密封的管螺纹 第2部分:用极限量规检验
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges
参考页数:30P.;A4
|
|
|
|
|
|
非螺纹密封的管螺纹 第1部分:标记、尺寸和公差
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
参考页数:8P;A4
|
|
|
|
|
|
符合ISO 261 和ISO 262 螺纹的紧固件用螺纹收尾
Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
参考页数:3P;A4
|
|
|
|
|
|
螺钉用十字槽
Cross recesses for screws
参考页数:9P;A4
|
|
|
|
|
|
紧固件 ISO米制外螺纹用螺纹退刀槽
Fasteners; Thread undercuts for external metric ISO threads
参考页数:2P;A4
|
|
|
|
|
|
ISO通用米制螺纹. 公差. 第1部分: 原则和基本数据
ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
参考页数:26P.;A4
|
|
|
|
|
|
储气瓶.储气瓶阀门连接用17E和25E锥形螺纹.检验量规
Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Inspection gauges
参考页数:26P.;A4
|
|
|
|
|
|
气瓶.气瓶阀门连接用17E和25E椎管螺纹.规范
Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Specifications
参考页数:18P.;A4
|
|
|
|
|