|
轴环连接 多边形轮廓P3G 第1部分:一般性和几何性
Shaft to collar connection - Polygon profil P3G - Part 1: Generalities and geometry
参考页数：10P.;A4
|
|
|
|
|
|
轴环连接 多边形轮廓P4C 第1部分:一般性和几何性
Shaft to collar connection - Polygon profile P4C - Part 1: Generalities and geometry
参考页数：9P.;A4
|
|
|
|
|
|
ISO通用米制螺纹.第26部分:优选公差级的细牙螺纹极限尺寸.标称直径252～1000mm
ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
参考页数：18P.;A4
|
|
|
|
|
|
ISO通用米制螺纹.第22部分:优选公差级的细牙螺纹极限尺寸.标称直径25～52mm
ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
参考页数：18P.;A4
|
|
|
|
|
|
ISO通用米制螺纹.第21部分:优选公差级的细牙螺纹极限尺寸.标称直径1mm～24.5mm
ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
参考页数：19P.;A4
|
|
|
|
|
|
用螺纹密封的管螺纹.第2部分:用极限量规检验
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
参考页数：2P.;A4
|
|
|
|
|
|
ISO通用米制螺纹.第24部分:优选公差级的细牙螺纹的极限尺寸.标称直径112mm至180mm
General purpose ISO metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 mm8
参考页数：19P.;A4
|
|
|
|
|
|
圆柱形轴端.第1部分:尺寸、公称传动力矩
Cylindrical Shaft Ends; Dimensions, Nominal Transmissible Torques
参考页数：3P.;A4
|
|
|
|
|
|
非螺纹密封连接管螺纹.第2部分:极限量规检定
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
参考页数：20P.;A4
|
|
|
|
|
|
ISO通用公制螺纹.公差.第5部分:与镀锌前最大公差位置为H的热浸镀锌外螺纹相匹配的内螺纹的尺寸限制 (ISO 965-5:1998)
ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998)
参考页数：8P.;A4
|
|
|
|
|
