|
管箍用惠氏管螺纹 平行内螺纹和锥形外螺纹 尺寸
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
参考页数：11P.;A4
|
|
|
|
|
|
非螺纹密封连接管螺纹.第1部分:尺寸、公差和命名
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
参考页数：11P.;A4
|
|
|
|
|
|
非螺纹密封连接的管螺纹.第1部分:尺寸、公差和命名.尺寸限值
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
参考页数：3P;A4
|
|
|
|
|
|
ISO一般用途米制螺纹.第20部分:带优先公差级的粗牙螺纹的尺寸极限.公称直径1mm-68mm
ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
参考页数：8P.;A4
|
|
|
|
|
|
锯齿螺纹.0.8至2mm的螺距.尺寸
Buttress threads - 0,8 mm to 2 mm pitch - Dimensions
参考页数：6P.;A4
|
|
|
|
|
|
轨道车辆桥的中心孔
Centre holes for rail vehicles axles
参考页数：2P.;A4
|
|
|
|
|
|
梯形螺纹、斜梯形螺纹和圆螺纹以及其他粗牙螺纹的螺纹尾部和螺纹退刀槽
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
参考页数：3P.;A4
|
|
|
|
|
|
S 型 90°中心孔.第8部分:尺寸的测量方法
Centre holes 90, form S; dimensions, determination process
参考页数：4P.;A4
|
|
|
|
|
|
|
|
ISO通用米制螺纹. 第51部分:过渡配合用外螺纹 (模型:紧密配合用螺纹). 公差, 极限偏差, 尺寸极限
ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
参考页数：15P.;A4
|
|
|
|
|
