|
加工中心试验条件 第8部分:3个协调平面的轮廓性能的评价
Test conditions for machining centres - Part 8: Evaluation of the contouring performance in the three coordinate planes
参考页数:6P.;A4
|
|
|
|
|
|
加工中心检验条件 第5部分:工件夹持板的定位精度和重复定位精度
Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets
参考页数:8P.;A4
|
|
|
|
|
|
加工中心检验条件 第4部分:线性和回转轴线的定位精度和重复定位精度
Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
参考页数:7P.;A4
|
|
|
|
|
|
加工中心检验条件 第3部分:分度或连续的万能主轴头机床的几何精度检验(垂直Z轴)
Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
参考页数:48P.;A4
|
|
|
|
|
|
加工中心检验条件.第1部分:带水平主轴的机床的几何精度检验(水平Z轴)
Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
参考页数:85P.;A4
|
|
|
|
|
|
加工中心检验条件.第6部分:速度和插补精度
Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations
参考页数:50P.;A4
|
|
|
|
|
|
加工中心检验条件 第7部分:精加工试件精度
Test conditions for machining centres - Part 7: Accuracy of finished test pieces
参考页数:24P.;A4
|
|
|
|
|
|
加工中心检验条件 第9部分:刀具交换和托板交换操作时间的评价
Test conditons for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
参考页数:13P.;A4
|
|
|
|
|
|
加工中心试验条件 第2部分:立式或带有垂直主回转轴万能轴头的机床的几何精度试验(垂直轴 Z)
Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
参考页数:41P;A4
|
|
|
|
|
|
组合机床三坐标加工单元 第2部分:立式三坐标加工单元 精度检验
参考页数:25
|
|
|
|
|