|
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
参考页数:7P.;A4
|
|
|
|
|
|
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
参考页数:5P.;A4
|
|
|
|
|
|
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
参考页数:7P.;A4
|
|
|
|
|
|
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
参考页数:6P.;A4
|
|
|
|
|
|
SDR9交联聚乙烯(PEX)管和SDR9高温聚乙烯(PE-RT)管用铜压接环或替代不锈钢夹的塑料插入件的标准规范
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
参考页数:8P.;A4
|
|
|
|
|
|
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
参考页数:6P.;A4
|
|
|
|
|
|
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
参考页数:6P.;A4
|
|
|
|
|
|
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
参考页数:6P.;A4
|
|
|
|
|
|
气体分配用外径控制聚酰胺-12管和管道用电熔型聚酰胺-12配件的标准规范
Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
参考页数:11P.;A4
|
|
|
|
|
|
0 ℉以上的管道设备中流体调节器配件的标准规格
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&xb0;F
参考页数:4P.;A4
|
|
|
|
|