Top New Releases: Available Now

·         QPL-AMS2644, September 2017 Edition 
      Inspection Material, Penetrant

·         MMPDS, 12th Edition 
      Metallic Materials Properties Development and Standardization (MMPDS-12)       Handbook 

·         ASME B30.16, 2017 Edition 
      Overhead Underhung and Stationary Hoists 

·         IPC-6013, Revision D 
      Qualification and Performance Specification for Flexible/Rigid- Flexible       Printed Boards 

·         TIA-1179, Revision A 
      Healthcare Facility Telecommunications Infrastructure Standard 

·         ANSI B77.1, 2017 Edition 
      Passenger Ropeways - Aerial Tramways, Aerial Lifts, Surface Lifts, Tows       and Conveyors - Safety Standard 

DIN EN ISO 1101, 2017 Edition 
      Geometrical Product Specifications (GPS) - Geometrical Tolerancing-       Tolerances of Form, Orientation, Location and Run-Out 

AASHTO -  American Association of State Highway and Transportation Officials

·         AASHTO M 320, 2017 Edition 
      Standard       Specification for Performance-Graded Asphalt Binder 

·         AASHTO M 294, 2017 Edition 
      Standard       Specification for Corrugated Polyethylene Pipe, 300- To 1500-MM (12- To       60-In.) Diameter

·         AASHTO T 99, 2017 Edition 
      Standard       Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg       (5.5-lb) Rammer and a 305-MM (12-In.) Drop

·         AASHTO M 147, 2017 Edition 
      Standard       Specification for Materials for Aggregate and Soil–Aggregate Subbase,       Base, and Surface Courses 

·         AASHTO M 170, 2017 Edition 
      Standard       Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer       Pipe 

ASTM - ASTM  International

·         ASTM A6/A6M, 2017 Edition 
      Standard       Specification for General Requirements for Rolled Structural Steel Bars,       Plates, Shapes, and Sheet Piling 

·         ASTM A568/A568M, 2017 Edition 
      Standard       Specification for Steel, Sheet, Carbon, Structural, and High-Strength,       Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for 

·         ASTM D4541, 2017 Edition 
      Standard       Test Method for Pull-Off Strength of Coatings Using Portable Adhesion       Testers

·         ASTM 02.02, 2017 Edition 
      Aluminum       and Magnesium Alloys

·         ASTM 04.01, 2017 Edition 
      Cement;       Lime; Gypsum 

GMW - General  Motors Worldwide

·         GMW15920, 4th Edition 
      Record Management for Suppliers 

·         GMW14124, 5th Edition 
      Automotive Environmental Cycles 

·         GMW3600, 8th Edition + Supplement 3: CG4816 
      Generic Supplier Analysis/Development/Validation Process Tasks and       Deliverables, including the CG4816 Supplement 

·         GMW17408, 2nd Edition 
      Flexible Expanded Rubber and Rubber-Like Materials for Air, Dust, Noise,       and Water Sealing 

·         GMW15758, 4th Edition 
      ADV Process Development and Validation Terminology