| 序号 |
卷号 |
中文名称 |
英文名称 |
| 1 |
ASTM A185 进口原版图谱 ADJA0185 |
兼任A185钢电焊加固，平原，混凝土和A497钢丝，变形，钢筋混凝土 |
Adjunct to A185 Steel Welded Wire Reinforcement, Plain, for Concrete and A497 Steel Wire, Deformed, for Concrete Reinforcement |
| 2 |
ASTM A247 进口原版图谱 ADJA0247 |
兼任A247测试方法，评估铁铸件中石墨显微结构 |
Adjunct to A247 Test Method for Evaluating the Microstructure of Graphite in Iron Castings |
| 3 |
ASTM A247A 进口原版图谱 ADJA0247A |
兼任A247A - 铸铁石墨微观结构等挂图 |
Adjunct to A247A - Iron Casting Graphite Microstructure Rating Wall Chart |
| 4 |
ASTM A255 进口原版图谱 ADJA0255 |
辅助A255试验方法确定钢的淬透 |
Adjunct to A255 Test Method for Determining Hardenability of Steel |
| 5 |
ASTM A561 进口原版图谱 ADJA0561 |
兼任A561推荐工具钢棒的宏观刻蚀试验的实践 |
Adjunct to A561 Recommended Practice for Macrotech Testing of Tool Steel Bars |
| 6 |
ASTM A604 进口原版图谱 ADJA0604 |
辅助A604自耗电极重熔钢棒材和钢坯的宏观腐蚀试验方法 |
Adjunct to A604 Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets |
| 7 |
ASTM A892 进口原版图谱 ADJA0892 |
辅助A892高碳轴承钢的显微结构的定义和评价的标准指南 |
Adjunct to A892 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels |
| 8 |
ASTM B276 进口原版图谱 ADJB0276A |
兼任B276硬质合金表观孔隙率的标准试验方法 |
Adjunct to B276 Standard Test Method for Apparent Porosity in Cemented Carbides |
| 9 |
ASTM B537 进口原版图谱 ADJB0537 |
兼任电镀面板的B537等大气曝光 |
Adjunct to B537 Rating of Electroplated Panels Subjected to Atmospheric Exposure |
| 10 |
ASTM B859 进口原版图谱 ADJB0859 |
兼任B859集聚的难熔金属粉末及其化合物之前粒度分析的标准规程 |
Adjunct to B859 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
| 11 |
ASTM C1043 进口原版图谱 ADJC1043 |
兼任使用循环线热源为的守卫热板设计的C1043实践 |
Adjunct to C1043 Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources |
| 12 |
ASTM C1114 进口原版图谱 ADJC1114 |
兼任C1114试验方法稳态热传导特性的薄膜加热器装置 |
Adjunct to C1114 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| 13 |
ASTM C1303 进口原版图谱 ADJC1303 |
辅助C1303试验方法预测长期热阻的闭孔泡沫保温 |
Adjunct to C1303 Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation |
| 14 |
ASTM C1340 进口原版图谱 ADJC1340 |
兼任C1340阁楼下热之收益或亏损天花估计的含辐射屏障使用的计算机程序的标准实施规程 |
Adjunct to C1340 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program |
| 15 |
ASTM C147 进口原版图谱 ADJC0147 |
辅助C147的玻璃容器内压强度试验方法 |
Adjunct to C147 Test Methods for Internal Pressure Strength of Glass Containers |
| 16 |
ASTM C1485 进口原版图谱 ADJC1485 |
兼任C1485电辐射热能源暴露的阁楼地板绝缘材料的临界辐射通量的标准试验方法 |
Adjunct to C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source |
| 17 |
ASTM C149 进口原版图谱 ADJC0149 |
玻璃容器抗热震性的辅助C149测试方法 |
Adjunct to C149 Test Method for Thermal Shock Resistance of Glass Containers |
| 18 |
ASTM C16 进口原版图谱 ADJC0016 |
兼任C16负载测试耐火砖在高温试验方法 |
Adjunct to C16 Test Method for Load Testing Refractory Brick at High Temperatures |
| 19 |
ASTM C177 进口原版图谱 ADJC0177 |
兼任C177稳态热通量和热传导特性的测试方法，通过有人看守的热板设备 |
Adjunct to C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| 20 |
ASTM C335 进口原版图谱 ADJC033501 |
辅助C335试验方法稳态传热特性的水平管道保温 |
Adjunct to C335 Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation |
| 21 |
ASTM C335 进口原版图谱 ADJC033502 |
辅助C335试验方法稳态传热特性的水平管道保温 |
Adjunct to C335 Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation |
| 22 |
ASTM C368 进口原版图谱 ADJC0368 |
兼任C368测试方法耐冲击的陶瓷餐具 |
Adjunct to C368 Test Method for Impact Resistance of Ceramic Tableware |
| 23 |
ASTM C450 进口原版图谱 ADJC0450A |
兼任NPS管道，实践C450标准制造的热绝缘配件盖和容器滞后 |
Adjunct to C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging |
| 24 |
ASTM C469 进口原版图谱 ADJC0469 |
辅助C469静态弹性模量和泊松比的混凝土压缩试验方法 |
Adjunct to C469 Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| 25 |
ASTM C485 进口原版图谱 ADJC0485 |
兼任C485测试方法测量瓷砖的翘曲 |
Adjunct to C485 Test Method for Measuring Warpage of Ceramic Tile |
| 26 |
ASTM C627 进口原版图谱 ADJC062701 |
兼任C627测试方法，评价陶瓷地砖安装使用罗宾逊型地板测试仪 |
Adjunct to C627 Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester |
| 27 |
ASTM C627 进口原版图谱 ADJC062702 |
兼任C627测试方法，评价陶瓷地砖安装使用罗宾逊型地板测试仪 |
Adjunct to C627 Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester |
| 28 |
ASTM C704 进口原版图谱 ADJC0704 |
在室温辅助C704耐火材料的抗磨损性的试验方法 |
Adjunct to C704 Test Method for Abrasion Resistance of Refractory Materials at Room Temperature |
| 29 |
ASTM C856 进口原版图谱 ADJC0856 |
兼任C856硬化混凝土的岩相学考试的实践 |
Adjunct to C856 Practice for Petrographic Examination of Hardened Concrete |
| 30 |
ASTM D1004 进口原版图谱 ADJD1004 |
塑料薄膜和薄片耐撕裂性的初步辅助D1004试验方法 |
Adjunct to D1004 Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
| 31 |
ASTM D1054 进口原版图谱 ADJD1054 |
橡胶与物业韧性，使用固特异 - 希利反弹摆辅助D1054试验方法 |
Adjunct to D1054 Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum |
| 32 |
ASTM D1118 进口原版图谱 ADJD1118 |
石棉纤维和石棉织物磁参数的辅助D1118试验方法 |
Adjunct to D1118 Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| 33 |
ASTM D1250 进口原版图谱 ADJD125001 |
兼任D1250石油测量表 - 第I卷 - D1250-80 |
Adjunct to D1250 Petroleum Measurement Tables -- Volume I -- D1250-80 |
| 34 |
ASTM D1250 进口原版图谱 ADJD125002 |
兼任D1250-80 D1250石油测量表 - 第二卷 - |
Adjunct to D1250 Petroleum Measurement Tables -- Volume II -- D1250-80 |
| 35 |
ASTM D1250 进口原版图谱 ADJD125003 |
兼任D1250-80 D1250石油测量表 - 第三卷 - |
Adjunct to D1250 Petroleum Measurement Tables -- Volume III -- D1250-80 |
| 36 |
ASTM D1250 进口原版图谱 ADJD125004 |
兼任D1250-80 D1250石油测量表 - 第四卷 - |
Adjunct to D1250 Petroleum Measurement Tables -- Volume IV -- D1250-80 |
| 37 |
ASTM D1250 进口原版图谱 ADJD125005 |
兼任D1250石油测量表 - 第五卷 - D1250-80 |
Adjunct to D1250 Petroleum Measurement Tables -- Volume V -- D1250-80 |
| 38 |
ASTM D1250 进口原版图谱 ADJD125006 |
兼任D1250石油测量表 - 第六卷 - D1250-80 |
Adjunct to D1250 Petroleum Measurement Tables -- Volume VI -- D1250-80 |
| 39 |
ASTM D1250 进口原版图谱 ADJD125007 |
兼任D1250-80 D1250石油测量表 - 第七卷 - |
Adjunct to D1250 Petroleum Measurement Tables -- Volume VII -- D1250-80 |
| 40 |
ASTM D1250 进口原版图谱 ADJD125008 |
兼任D1250石油测量表 - 第八册 - D1250-80 |
Adjunct to D1250 Petroleum Measurement Tables -- Volume VIII -- D1250-80 |
| 41 |
ASTM D1250 进口原版图谱 ADJD125009 |
兼任D1250-80 D1250石油测量表 - 体积IX - |
Adjunct to D1250 Petroleum Measurement Tables -- Volume IX -- D1250-80 |
| 42 |
ASTM D1250 进口原版图谱 ADJD125010 |
兼任D1250石油测量表 - 卷X - D1250-80 |
Adjunct to D1250 Petroleum Measurement Tables -- Volume X -- D1250-80 |
| 43 |
ASTM D1250 进口原版图谱 ADJD125011 |
兼任D1250-80 D1250石油测量表 - 第十一/十二 - |
Adjunct to D1250 Petroleum Measurement Tables -- Volume XI/XII -- D1250-80 |
| 44 |
ASTM D1250 进口原版图谱 ADJD1250AM |
辅助D1250石油测量表 - 历史版 |
Adjunct to D1250 Petroleum Measurement Tables -- Historical Edition |
| 45 |
ASTM D1250 进口原版图谱 ADJD1250CD |
兼任D1250-04广义的原油，成品油，润滑油的温度和压力的体积修正系数 |
Adjunct to D1250-04 Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils |
| 46 |
ASTM D1250 进口原版图谱 ADJD1250CD2 |
兼任D1250-08密度/重量/体积Intraconversion的 |
Adjunct to D1250-08 Density/ Weight/ Volume Intraconversion |
| 47 |
ASTM D1250 进口原版图谱 ADJD1250CS |
兼任D1250石油计量表（全套） |
Adjunct to D1250 Petroleum Measurement Tables (Complete Set) |
| 48 |
ASTM D1264 进口原版图谱 ADJD3336 |
兼职为D1264，D1478润滑脂，低温扭矩球轴承润滑脂，D3336球轴承中润滑脂寿命的特点，在高温下确定水冲洗 |
Adjunct to D1264 Determining the Water Washout Characteristics of Lubricating Greases, D1478 Low-Temperature Torque of Ball Bearing Grease, and D3336 Life of Lubricating Greases in Ball Bearings at Elevated Temperatures |
| 49 |
ASTM D130 进口原版图谱 ADJD0130 |
兼任D130铜片腐蚀标准石油，D1838标准试验方法。液化石油（LP）气，和D4048的标准试验方法检测铜片腐蚀铜片腐蚀润滑脂 |
Adjunct to D130 Copper Strip Corrosion Standard for Petroleum, D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases, and D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease |
| 50 |
ASTM D1360 进口原版图谱 ADJD1360 |
兼任D1360涂料的阻燃性测试方法（内阁法） |
Adjunct to D1360 Test Method for Fire Retardancy of Paints (Cabinet Method) |
| 51 |
ASTM D1384 进口原版图谱 ADJD1384 |
辅助D1384玻璃器皿中发动机冷却剂腐蚀试验的试验方法 |
Adjunct to D1384 Test Method for Corrosion Test for Engine Coolants in Glassware |
| 52 |
ASTM D1494 进口原版图谱 ADJD1494 |
辅助D1494增强塑料板的散射光透射率的测试方法 |
Adjunct to D1494 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
| 53 |
ASTM D1531 进口原版图谱 ADJD1531 |
辅助D1531试验方法，用液体位移程序，相对介电常数（介电常数）及损耗因数 |
Adjunct to D1531 Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures |
| 54 |
ASTM D1560 进口原版图谱 ADJD156001 |
D1560沥青混合料抗变形和粘结性的试验方法辅助手段的Hveem设备 |
Adjunct to D1560 Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus |
| 55 |
ASTM D1561 进口原版图谱 ADJD1561 |
兼任美国加州揉压实沥青混合料试验样品的制备，通过D1561实践 |
Adjunct to D1561 Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
| 56 |
ASTM D1693 进口原版图谱 ADJD169303 |
兼任D1693测试方法乙烯塑料环境应力开裂 |
Adjunct to D1693 Test Method for Environmental Stress-Cracking of Ethylene Plastics |
| 57 |
ASTM D1770 进口原版图谱 ADJD1770 |
兼任D1770测试方法对棉结，植物性物质与有色纤维毛条 |
Adjunct to D1770 Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top |
| 58 |
ASTM D1781 进口原版图谱 ADJD1781 |
辅助D1781滚筒剥离胶粘剂的试验方法 |
Adjunct to D1781 Test Method for Climbing Drum Peel for Adhesives |
| 59 |
ASTM D1828 进口原版图谱 ADJD1828 |
兼任大气暴露的胶接接头和结构的D1828实践 |
Adjunct to D1828 Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
| 60 |
ASTM D1912 进口原版图谱 |
装饰用皮革的耐冷裂纹的辅助D1912测试方法 |
Adjunct to D1912 Test Method for Cold-Crack Resistance of Upholstery Leather |
| 61 |
ASTM D1928 进口原版图谱 ADJD1928 |
辅助D1928实践制备压缩成型聚乙烯测试表和测试样品（已停产2001） |
Adjunct to D1928 Practice for Preparation of Compression-Molded Polyethylene Test Sheets and Test Specimens (Discontinued 2001) |
| 62 |
ASTM D2094 进口原版图谱 ADJD2094 |
辅助D2094实践棒材和盘条试样的制备附着力测试 |
Adjunct to D2094 Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
| 63 |
ASTM D2096 进口原版图谱 |
皮革洗涤时的色牢度和颜色的转让兼任D2096测试方法 |
Adjunct to D2096 Test Method for Colorfastness and Transfer of Color in the Washing of Leather |
| 64 |
ASTM D2136 进口原版图谱 ADJD2136 |
辅助涂层织物低温弯曲试验D2136试验方法 |
Adjunct to D2136 Test Method for Coated Fabrics-Low-Temperature Bend Test |
| 65 |
ASTM D2148 进口原版图谱 ADJD2148 |
兼任D2148试验方法可粘接硅橡胶胶带用于电气绝缘 |
Adjunct to D2148 Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation |
| 66 |
ASTM D2161 进口原版图谱 ADJD2161 |
兼任D2161运动粘度转换实践赛波特通用粘度或塞波特糠醛粘度 |
Adjunct to D2161 Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| 67 |
ASTM D2230 进口原版图谱 ADJD2230 |
橡胶物业未硫化化合物的可挤压性辅助D2230试验方法 |
Adjunct to D2230 Test Method for Rubber Property-Extrudability of Unvulcanized Compounds |
| 68 |
ASTM D2255 进口原版图谱 ADJD2255 |
分级纱线的外观兼任D2255测试方法 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance |
| 69 |
ASTM D2255 进口原版图谱 ADJD225501 |
兼任D2255测试方法分级细纱外观 - 系列1-79 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 1-79 |
| 70 |
ASTM D2255 进口原版图谱 ADJD225501C |
兼任D2255试验方法分级细纱外观 - 系列1-79（组合产品 - 辅助加标准） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 1-79 (Combination product -- adjunct plus standard) |
| 71 |
ASTM D2255 进口原版图谱 ADJD225502 |
兼任D2255测试方法分级细纱外观 - 系列2-79 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 2-79 |
| 72 |
ASTM D2255 进口原版图谱 ADJD225502C |
兼任D2255试验方法分级细纱外观 - 系列2-79（组合产品 - 辅助加标准） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 2-79 (Combination product -- adjunct plus standard) |
| 73 |
ASTM D2255 进口原版图谱 ADJD225503 |
兼任D2255测试方法分级细纱外观 - 系列3-79 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 3-79 |
| 74 |
ASTM D2255 进口原版图谱 ADJD225503C |
兼任D2255试验方法分级细纱外观 - 系列3-79（组合产品 - 辅助加标准） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 3-79 (Combination product -- adjunct plus standard) |
| 75 |
ASTM D2255 进口原版图谱 ADJD225504 |
兼任D2255测试方法分级细纱外观 - 系列4-79 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 4-79 |
| 76 |
ASTM D2255 进口原版图谱 ADJD225504C |
兼任D2255试验方法分级细纱外观 - 系列4-79（组合产品 - 辅助加标准） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 4-79 (Combination product -- adjunct plus standard) |
| 77 |
ASTM D2255 进口原版图谱 ADJD225505 |
兼任D2255测试方法分级细纱外观 - 系列5-79 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 5-79 |
| 78 |
ASTM D2255 进口原版图谱 ADJD225505C |
兼任D2255试验方法分级细纱外观 - 系列5-79（组合产品 - 辅助加标准） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 5-79 (Combination product -- adjunct plus standard) |
| 79 |
ASTM D2255 进口原版图谱 ADJD225506 |
兼任D2255测试方法分级细纱外观 - 系列6-79 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 6-79 |
| 80 |
ASTM D2255 进口原版图谱 ADJD225506C |
兼任D2255试验方法分级细纱外观 - 系列6-79（组合产品 - 辅助加标准） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 6-79 (Combination product -- adjunct plus standard) |
| 81 |
ASTM D2255 进口原版图谱 ADJD2255ALL |
辅助分级纱线外观系列1-79，4-79系列，系列2-79，3-79系列，系列5-79，6-79系列（D2255测试方法相结合的产物） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance —Series 1-79, Series 2-79, Series 3-79, Series 4-79, Series 5-79, and Series 6-79 (Combination product) |
| 82 |
ASTM D2255 进口原版图谱 ADJD2255STD |
兼任D2255试验方法分级细纱外观 - 系列1-79，5-79系列，系列2-79，3-79系列，系列4-79和6-79组（组合产品 - 6个辅助加标准） |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance — Series 1-79, Series 2-79, Series 3-79, Series 4-79, Series 5-79, and Series 6-79 (Combination product — 6 adjuncts plus standard) |
| 83 |
ASTM D2294 进口原版图谱 ADJD2294 |
兼任D2294测试方法胶粘剂拉伸剪切蠕变性能（金属对金属） |
Adjunct to D2294 Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| 84 |
ASTM D2338 进口原版图谱 ADJD2338 |
辅助D2338试验方法确定颗粒大小的多色油漆 |
Adjunct to D2338 Test Method for Determining Particle Size of Multicolor Lacquers |
| 85 |
ASTM D2463 进口原版图谱 ADJD2463 |
吹模制热塑性塑料容器耐跌落冲击性的辅助D2463试验方法 |
Adjunct to D2463 Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
| 86 |
ASTM D2477 进口原版图谱 ADJD2477 |
在工业电源频率下的介电击穿电压和介电强度的绝缘气体辅助D2477试验方法 |
Adjunct to D2477 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies |
| 87 |
ASTM D2502 进口原版图谱 ADJD2502 |
兼任D2502试验方法估计的分子量（相对分子质量）的石油粘度测量 |
Adjunct to D2502 Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements |
| 88 |
ASTM D2512 进口原版图谱 |
兼任D2512试验方法材料与液氧相容性（冲击敏感阈值“和”通行证失效技术） |
Adjunct to D2512 Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) |
| 89 |
ASTM D2562 进口原版图谱 ADJD2562 |
兼任D2562实践中可见缺陷分类纤维增强热固性塑料零件成型 |
Adjunct to D2562 Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics |
| 90 |
ASTM D2563 进口原版图谱 ADJD2563 |
玻璃纤维增强塑料层压零件中可见缺陷分类兼任D2563实践 |
Adjunct to D2563 Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts |
| 91 |
ASTM D2570 进口原版图谱 ADJD257001 |
兼任D2570测试发动机冷却剂的模拟使用腐蚀试验方法 |
Adjunct to D2570 Test Method for Simulated Service Corrosion Testing of Engine Coolants |
| 92 |
ASTM D2570 进口原版图谱 ADJD257002 |
兼任D2570测试发动机冷却剂的模拟使用腐蚀试验方法 |
Adjunct to D2570 Test Method for Simulated Service Corrosion Testing of Engine Coolants |
| 93 |
ASTM D2589 进口原版图谱 ADJD2589 |
辅助D2589试验方法McNett决斗石棉纤维的湿法分类 |
Adjunct to D2589 Test Method for McNett Wet Classification of Duel Asbestos Fiber |
| 94 |
ASTM D2590 进口原版图谱 ADJD2590 |
辅助D2590试验方法，采样温石棉 |
Adjunct to D2590 Test Method for Sampling Chrysotile Asbestos |
| 95 |
ASTM D2663 进口原版图谱 ADJD266301 |
兼任D2663试验方法碳黑在橡胶中的分散 |
Adjunct to D2663 Test Methods for Carbon Black-Dispersion in Rubber |
| 96 |
ASTM D2663 进口原版图谱 ADJD266302 |
兼任D2663试验方法碳黑在橡胶中的分散 |
Adjunct to D2663 Test Methods for Carbon Black-Dispersion in Rubber |
| 97 |
ASTM D2739 进口原版图谱 ADJD2739 |
兼任D2739测试方法导电胶体积电阻率 |
Adjunct to D2739 Test Method for Volume Resistivity of Conductive Adhesives |
| 98 |
ASTM D2782 进口原版图谱 ADJD2509 |
兼任D2509测试方法测量的承载能力的润滑脂（铁姆肯方法），和D2782试验方法测量的润滑油的极压性能（铁姆肯方法） |
Adjunct to D2509 Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method), and D2782 Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) |
| 99 |
ASTM D2809 进口原版图谱 ADJD2809 |
兼任D2809试验方法气蚀，冲刷腐蚀特性的发动机冷却剂的铝泵 |
Adjunct to D2809 Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| 100 |
ASTM D2821 进口原版图谱 |
辅助D2821扭丝装置，通过测量皮革的相对硬度试验方法 |
Adjunct to D2821 Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus |
| 101 |
ASTM D2843 进口原版图谱 ADJD2843 |
兼任D2843塑料燃烧或分解的烟密度试验方法 |
Adjunct to D2843 Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
| 102 |
ASTM D2844 进口原版图谱 ADJD284401 |
兼任D2844测试方法电阻R-值和膨胀压力的压实的土壤 |
Adjunct to D2844 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils |
| 103 |
ASTM D2844 进口原版图谱 ADJD284402 |
兼任D2844测试方法电阻R-值和膨胀压力的压实的土壤 |
Adjunct to D2844 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils |
| 104 |
ASTM D2844 进口原版图谱 ADJD284403 |
兼任D2844测试方法电阻R-值和膨胀压力的压实的土壤 |
Adjunct to D2844 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils |
| 105 |
ASTM D2889 进口原版图谱 ADJD2889 |
兼任D2889测试方法计算真正的石油馏出燃料的蒸气压力 |
Adjunct to D2889 Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels |
| 106 |
ASTM D2919 进口原版图谱 ADJD2919 |
辅助D2919试验方法确定胶接头的耐久性强调，在拉伸剪切 |
Adjunct to D2919 Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| 107 |
ASTM D3022 进口原版图谱 ADJD3022 |
兼任D3022测试方法橡胶焦油（2000年停产） |
Adjunct to D3022 Test Methods for Rubberized Tar (Discontinued 2000) |
| 108 |
ASTM D3241 进口原版图谱 ADJD3241 |
D3241航空涡轮燃料的热氧化稳定性的辅助 |
Adjunct to D3241 Thermal Oxidation Stability of Aviation Turbine Fuels |
| 109 |
ASTM D341 进口原版图谱 ADJD034101 |
兼任D341（表一） - 液体石油产品粘度 - 温度图 |
Adjunct to D341 Chart I -- Viscosity-Temperature Charts for Liquid Petroleum Products |
| 110 |
ASTM D341 进口原版图谱 ADJD034102 |
兼任D341图II - 液体石油产品粘度 - 温度图 |
Adjunct to D341 Chart II -- Viscosity-Temperature Charts for Liquid Petroleum Products |
| 111 |
ASTM D341 进口原版图谱 ADJD034103 |
兼任D341图III - 液体石油产品粘度 - 温度图 |
Adjunct to D341 Chart III -- Viscosity-Temperature Charts for Liquid Petroleum Products |
| 112 |
ASTM D341 进口原版图谱 ADJD034104 |
兼任D341图IV - 液体石油产品粘度 - 温度图 |
Adjunct to D341 Chart IV -- Viscosity-Temperature Charts for Liquid Petroleum Products |
| 113 |
ASTM D341 进口原版图谱 ADJD034105 |
兼任D341图V - 液体石油产品粘度 - 温度图 |
Adjunct to D341 Chart V -- Viscosity-Temperature Charts for Liquid Petroleum Products |
| 114 |
ASTM D341 进口原版图谱 ADJD034106 |
兼任D341图VI - 液体石油产品粘度 - 温度图 |
Adjunct to D341 Chart VI -- Viscosity-Temperature Charts for Liquid Petroleum Products |
| 115 |
ASTM D341 进口原版图谱 ADJD034107 |
兼任D341图七 - 液体石油产品粘度 - 温度图 |
Adjunct to D341 Chart VII -- Viscosity-Temperature Charts for Liquid Petroleum Products |
| 116 |
ASTM D341 进口原版图谱 ADJD0341CS |
兼任D341液体石油产品粘度 - 温度图 |
Adjunct to D341 Viscosity-Temperature Charts for Liquid Petroleum Products |
| 117 |
ASTM D3410 进口原版图谱 |
|
Adjunct to D3410/D3410M Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
| 118 |
ASTM D3512 进口原版图谱 ADJD3512 |
辅助D3512试验方法抗起毛起球性及其它有关表面变化的纺织面料：乱翻式起毛起球测试仪 |
Adjunct to D3512 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
| 119 |
ASTM D3514 进口原版图谱 ADJD3514 |
兼任D3514起毛起球性及其它有关表面变化的纺织面料：弹性垫 |
Adjunct to D3514 Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad |
| 120 |
ASTM D3639 进口原版图谱 ADJD3639 |
石棉分类标准测试魁北克辅助D3639试验方法 |
Adjunct to D3639 Test Method for Classification of Asbestos by Quebec Standard Test |
| 121 |
ASTM D412 进口原版图谱 ADJD0412 |
辅助D412硫化橡胶和热塑性橡胶和热塑性弹性体的张力试验方法 |
Adjunct to D412 Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension |
| 122 |
ASTM D4176 进口原版图谱 ADJD417601 |
兼任D4176蒸馏燃料条形图 |
Adjunct to D4176 Distillate Fuel Bar Chart |
| 123 |
ASTM D4176 进口原版图谱 ADJD417602 |
兼任D4176蒸馏燃料的雾度评价标准 |
Adjunct to D4176 Distillate Fuel Haze Rating Standard |
| 124 |
ASTM D422 进口原版图谱 ADJD0422 |
兼任D422测试方法土壤粒径分析 |
Adjunct to D422 Test Method for Particle-Size Analysis of Soils |
| 125 |
ASTM D4231 进口原版图谱 ADJD4231 |
兼任评价HygrometerD4231 - 01可洗涤机织衬衫和运动衫D4231实践 |
Adjunct to D4231 Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts |
| 126 |
ASTM D4255/D4255M 进口原版图谱 |
辅助的铁剪法D4255/D4255M聚合物基复合材料的面内剪切性能的标准试验方法 |
Adjunct to D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
| 127 |
ASTM D429 进口原版图谱 ADJD0429 |
辅助D429试验方法橡胶性能的粘合硬质衬底 |
Adjunct to D429 Test Methods for Rubber Property-Adhesion to Rigid Substrates |
| 128 |
ASTM D4491 进口原版图谱 |
兼任D4491试验方法透水土工布的介电常数 |
Adjunct to D4491 Test Methods for Water Permeability of Geotextiles by Permittivity |
| 129 |
ASTM D4496 进口原版图谱 ADJD4496 |
兼任D4496中等导电材料直流电阻或电导的标准测试方法 |
Adjunct to D4496 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials |
| 130 |
ASTM D4501 进口原版图谱 ADJD4501 |
兼任D4501测试方法为硬质衬底之间的粘接剪切强度的块剪法 |
Adjunct to D4501 Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
| 131 |
ASTM D4680 进口原版图谱 ADJD4680 |
兼任D4680测试方法胶粘剂静剪切压力负荷故障（木材 - 木材的蠕变和时间） |
Adjunct to D4680 Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| 132 |
ASTM D4685 进口原版图谱 ADJD4685 |
辅助D4685毛绒磨损的标准试验方法 |
Adjunct to D4685 Standard Test Method for Pile Fabric Abrasion |
| 133 |
ASTM D4740 进口原版图谱 ADJD4740 |
辅助D4740的残留燃料的清洁和兼容性的测试方法，采用点测试 |
Adjunct to D4740 Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
| 134 |
ASTM D5266 进口原版图谱 ADJD5266 |
兼任D5266实践估算对木材破坏百分率胶接接头 |
Adjunct to D5266 Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
| 135 |
ASTM D5379/D5379M 进口原版图谱 |
辅助D5379/D5379M复合材料的剪切性能的标准试验方法V-缺口梁法 |
Adjunct to D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| 136 |
ASTM D5426 进口原版图谱 ADJD5426 |
用于充气减震织物的外观检查和分级的辅助D5426实践 |
Adjunct to D5426 Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints |
| 137 |
ASTM D5489 进口原版图谱 ADJD5489 |
兼任D5489纺织产品保养说明护理符号的标准指南 |
Adjunct to D5489 Standard Guide for Care Symbols for Care Instructions on Textile Products |
| 138 |
ASTM D5573 进口原版图谱 ADJD5573 |
纤维增强塑料（FRP）接头失效方式分类的辅助D5573实践 |
Adjunct to D5573 Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| 139 |
ASTM D5596 进口原版图谱 |
辅助D5596的炭黑在聚烯烃土工合成材料的分散的微观评价 |
Adjunct to D5596 Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
| 140 |
ASTM D5704 进口原版图谱 ADJD5704A |
兼任D5704试验方法评价热 |
Adjunct to D5704 Test Method for Evaluation of the Thermal and |
| 141 |
ASTM D610 进口原版图谱 ADJD0610A |
辅助D610涂漆钢表面锈蚀程度评价的试验方法 |
Adjunct to D610 Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces |
| 142 |
ASTM D623 进口原版图谱 ADJD0623 |
兼任D623橡胶物业余热发电的试验方法在压缩和弯曲疲劳 |
Adjunct to D623 Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression |
| 143 |
ASTM D6416/D6416M 进口原版图谱 |
分布式负载下的辅助D6416/D6416M两维简支夹芯复合板的弯曲性能试验方法 |
Adjunct to D6416/D6416M Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
| 144 |
ASTM D6478 进口原版图谱 ADJD6478 |
辅助D6478试验方法，确定具体的填充性面料充气约束 |
Adjunct to D6478 Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints |
| 145 |
ASTM D6478 进口原版图谱 ADJD6478A |
兼任D6478的标准试验方法确定具体的填充性面料充气约束 |
Adjunct to D6478 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints |
| 146 |
ASTM D6514 进口原版图谱 ADJD6514 |
兼任D6514的标准试验方法高温通用氧化试验的汽轮机油 |
Adjunct to D6514 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
| 147 |
ASTM D6641/D6641M 进口原版图谱 |
辅助D6641/D6641M试验方法确定压缩性能的聚合物基复合材料层合板用组合式荷载压力测试夹具（CLC） |
Adjunct to D6641/D6641M Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture |
| 148 |
ASTM D6789 进口原版图谱 ADJD06PAPERAGE |
辅助D6789的标准试验方法氙弧曝光装置的印刷和书写纸加速照明老化， |
Adjunct to D6789 Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus, |
| 149 |
ASTM D7012 进口原版图谱 ADJD7012 |
不同状态下的压力和温度辅助D7012的完整岩心样品的抗压强度和弹性模量的标准试验方法 |
Adjunct to D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
| 150 |
ASTM D7078 进口原版图谱 |
辅助的D7078 - D V-缺口铁剪夹具加工图纸 |
Adjunct to D7078 -- D V-Notched Rail Shear Fixture Machining Drawings |
| 151 |
ASTM D714 进口原版图谱 ADJD0714 |
辅助D714油漆起泡度评价的试验方法 |
Adjunct to D714 Test Method for Evaluating Degree of Blistering of Paints |
| 152 |
ASTM D7152 进口原版图谱 ADJD7152 |
石油产品的混合粘度的计算辅助D7152实践 |
Adjunct to D7152 Practice for Calculating the Viscosity of a Blend of Petroleum Products |
| 153 |
ASTM D731 进口原版图谱 ADJD0731 |
辅助D731热固性模塑料粉末的模塑指数的试验方法 |
Adjunct to D731 Test Method for Molding Index of Thermosetting Molding Powder |
| 154 |
ASTM D7331 进口原版图谱 ADJD7331A |
兼职缝制产品标记数据交换的标准规程D7331 |
Adjunct to D7331 Standard Practice for Sewn Products Marker Data Interchange |
| 155 |
ASTM D7331 进口原版图谱 ADJD7331CS |
兼任D7331缝制产品标记数据交换的标准规程+有效的标准 |
Adjunct to D7331 Standard Practice for Sewn Products Marker Data Interchange + Active Standard |
| 156 |
ASTM D7451 进口原版图谱 ADJD7451 |
兼任D7451的标准测试方法的分水性能的轻质和中间馏份和压缩和火花点火燃料 |
Adjunct to D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels |
| 157 |
ASTM D746 进口原版图谱 ADJD0746 |
塑料及弹性材料的脆化温度的影响兼任D746测试方法 |
Adjunct to D746 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| 158 |
ASTM D748 进口原版图谱 ADJD074801 |
辅助D748规格的天然云母块和云母薄片适合使用固定式云母介电电容器 |
Adjunct to D748 Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors |
| 159 |
ASTM D748 进口原版图谱 ADJD074802 |
辅助D748规格的天然云母块和云母薄片适合使用固定式云母介电电容器 |
Adjunct to D748 Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors |
| 160 |
ASTM D7510 进口原版图谱 ADJDQCALC |
兼任D7510标准规程进行检测和定量估计和数据评估利用DQCALC软件，根据ASTM D6091和D6512委员会水D19和D2777标准实践委员会D19水适用的试验方法测定的精密度和偏差的实践 |
Adjunct to D7510 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water and D2777 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| 161 |
ASTM D817 进口原版图谱 ADJD0817 |
兼任D817测试方法的测试醋酸丙酸纤维素和醋酸丁酸纤维素 |
Adjunct to D817 Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate |
| 162 |
ASTM D868 进口原版图谱 ADJD0868 |
辅助D868评估出血程度的交通涂料的试验方法 |
Adjunct to D868 Test Method for Evaluating Degree of Bleeding of Traffic Paint |
| 163 |
ASTM D909 进口原版图谱 ADJD090901 |
辅助D909增压法测定航空汽油爆震特性的试验方法 |
Adjunct to D909 Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method |
| 164 |
ASTM D909 进口原版图谱 ADJD090902 |
辅助D909增压法测定航空汽油爆震特性的试验方法 |
Adjunct to D909 Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method |
| 165 |
ASTM D913 进口原版图谱 ADJD0913 |
兼任D913测试方法评估交通涂料的磨损程度的相关性 |
Adjunct to D913 Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint |
| 166 |
ASTM D976 进口原版图谱 ADJD0976 |
兼任D976测试馏分燃料十六烷指数的计算方法 |
Adjunct to D976 Test Methods for Calculated Cetane Index of Distillate Fuels |
| 167 |
ASTM E112 进口原版图谱 |
兼任E112方法确定平均晶粒尺寸 - 板1A和1B（36W所述18L） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Plate 1A and 1B (36W x 18L) |
| 168 |
ASTM E112 进口原版图谱 |
兼任E112方法确定平均晶粒尺寸 - 牧羊人系列再现 |
Adjunct to E112 Methods for Determining the Average Grain Size -- Shepherd Series Reproduction |
| 169 |
ASTM E112 进口原版图谱 ADJE11202P |
兼任E112方法确定平均晶粒尺寸 - 板II（16W x 21L） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Plate II (16W x 21L) |
| 170 |
ASTM E112 进口原版图谱 ADJE11203P |
兼任E112方法确定平均晶粒尺寸 - 板III（16W x 21L） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Plate III (16W x 21L) |
| 171 |
ASTM E112 进口原版图谱 ADJE11204P |
兼任E112方法确定平均晶粒尺寸 - 板IV（15.5W x 17.5L） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Plate IV (15.5W x 17.5L) |
| 172 |
ASTM E112 进口原版图谱 ADJE11205T |
确定平均晶粒尺寸的兼职E112方法 - 粒度00（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 00 (8.5 x 11) |
| 173 |
ASTM E112 进口原版图谱 ADJE11206T |
确定平均晶粒尺寸的兼职E112方法 - 粒度0（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 0 (8.5 x 11) |
| 174 |
ASTM E112 进口原版图谱 ADJE11207T |
兼任E112方法确定平均晶粒尺寸 - 晶粒尺寸为0.5（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 0.5 (8.5 x 11) |
| 175 |
ASTM E112 进口原版图谱 ADJE11208T |
辅助E112确定的平均晶粒尺寸的方法 - 粒度1.0（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 1.0 (8.5 x 11) |
| 176 |
ASTM E112 进口原版图谱 ADJE11209T |
兼任E112方法确定平均晶粒尺寸 - 晶粒尺寸为1.5（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 1.5 (8.5 x 11) |
| 177 |
ASTM E112 进口原版图谱 ADJE11210T |
兼任E112确定的平均晶粒尺寸的方法 - 粒度2.0（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 2.0 (8.5 x 11) |
| 178 |
ASTM E112 进口原版图谱 ADJE11211T |
辅助 - E112方法确定平均晶粒尺寸晶粒尺寸为2.5（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 2.5 (8.5 x 11) |
| 179 |
ASTM E112 进口原版图谱 ADJE11212T |
兼任E112确定的平均晶粒尺寸的方法 - 粒度3.0，3.5，4.0（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 3.0, 3.5, 4.0 (8.5 x 11) |
| 180 |
ASTM E112 进口原版图谱 ADJE11213T |
兼任E112方法确定平均晶粒尺寸 - 粒度4.5，5.0，5.5（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 4.5, 5.0, 5.5 (8.5 x 11) |
| 181 |
ASTM E112 进口原版图谱 ADJE11214T |
兼任E112确定的平均晶粒尺寸的方法 - 粒度6.0，6.5，7.0（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 6.0, 6.5, 7.0 (8.5 x 11) |
| 182 |
ASTM E112 进口原版图谱 ADJE11215T |
兼任E112确定的平均晶粒尺寸的方法 - 粒度7.5，8.0，8.5（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 7.5, 8.0, 8.5 (8.5 x 11) |
| 183 |
ASTM E112 进口原版图谱 ADJE11216T |
兼任E112确定的平均晶粒尺寸的方法 - 粒度9.0，9.5，10.0（8.5×11） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Grain Size 9.0, 9.5, 10.0 (8.5 x 11) |
| 184 |
ASTM E112 进口原版图谱 ADJE11217F |
兼任E112方法确定平均晶粒尺寸 - 图5（8W X 10L） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Figure 5 (8W x 10L) |
| 185 |
ASTM E112 进口原版图谱 ADJE112CS |
确定平均晶粒尺寸 - 全套的辅助E112方法 |
Adjunct to E112 Methods for Determining the Average Grain Size -- Complete Set |
| 186 |
ASTM E112 进口原版图谱 ADJE112PS |
兼任E112方法确定平均晶粒尺寸 - 板组合I，II，III，IV |
Adjunct to E112 Methods for Determining the Average Grain Size -- Combination of Plates I, II, III, IV |
| 187 |
ASTM E112 进口原版图谱 ADJE112TS |
兼任E112平均晶粒尺寸确定方法 - 全套的所有透明胶片（图版1A和1B）（00至10） |
Adjunct to E112 Methods for Determining the Average Grain Size -- Complete Set of All Transparencies (Plate 1A and 1B) (00 through 10) |
| 188 |
ASTM E1181 进口原版图谱 ADJE1181 |
双面晶粒尺寸的特性兼任E1181的测试方法 |
Adjunct to E1181 Test Methods for Characterizing Duplex Grain Sizes |
| 189 |
ASTM E125 进口原版图谱 ADJE0125 |
兼任E125参考照片有色金属铸件磁性粒子上的指示 |
Adjunct to E125 Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| 190 |
ASTM E1274 进口原版图谱 ADJE1274 |
兼任E1274测试方法测量路面平整度的使用Profilograph |
Adjunct to E1274 Test Method for Measuring Pavement Roughness Using a Profilograph |
| 191 |
ASTM E1317 进口原版图谱 ADJE1317 |
兼任E1317测试方法的易燃性的的海洋表面处理和兼职E1321确定材料的点火和火焰蔓延性能的试验方法 |
Adjunct to E1317 Test Method for Flammability of Marine Surface Finishes and Adjunct to E1321 Test Method for Determining Material Ignition and Flame Spread Properties |
| 192 |
ASTM E1320 进口原版图谱 RRE132001 |
兼任E1320钛铸件参考射线照片 |
Adjunct to E1320 Reference Radiographs for Titanium Castings |
| 193 |
ASTM E1320 进口原版图谱 RRE132002 |
兼任E1320钛铸件参考射线照片 |
Adjunct to E1320 Reference Radiographs for Titanium Castings |
| 194 |
ASTM E1320 进口原版图谱 RRE1320CS |
兼任E1320钛铸件参考射线照片 |
Adjunct to E1320 Reference Radiographs for Titanium Castings |
| 195 |
ASTM E1478 进口原版图谱 ADJE1478 |
兼任视觉色彩评估的透明片材E1478实践 |
Adjunct to E1478 Practice for Visual Color Evaluation of Transparent Sheet Materials |
| 196 |
ASTM E1527 进口原版图谱 ADJE152705 |
辅助E1527环境现场评估：第一阶段环境现场评估过程 |
Adjunct to E1527 Environmental Site Assessments: Phase I Environmental Site Assessment Process |
| 197 |
ASTM E1528 进口原版图谱 ADJE152806 |
辅助E1528环境现场评估交易的屏幕问卷的 |
Adjunct to E1528 Environmental Site Assessment Transaction Screen Questionnaire |
| 198 |
ASTM E155 进口原版图谱 RE0155CS |
兼任E155参考射线照片的铝和镁铸件检验 |
Adjunct to E155 Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| 199 |
ASTM E155 进口原版图谱 RRE015501 |
兼任E155第I卷 - 参考X光片的铝和镁铸件检验 |
Adjunct to E155 Volume I -- Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| 200 |
ASTM E155 进口原版图谱 RRE015502 |
兼任E155第二卷 - 铝和镁铸件检验的参考射线照片 |
Adjunct to E155 Volume II -- Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| 201 |
ASTM E1648 进口原版图谱 RRE1648 |
兼任E1648参考射线照相检验的铝合金熔焊 |
Adjunct to E1648 Reference Radiographs for Examination of Aluminum Fusion Welds |
| 202 |
ASTM E186 进口原版图谱 RRE018601 |
兼任E186第一卷 - 厚壁（2至4的1/2-英寸（51至114毫米））钢铸件的基准射线摄影 |
Adjunct to E186 Volume I -- Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings |
| 203 |
ASTM E186 进口原版图谱 RRE018602 |
兼任E186第二卷 - 厚壁（2〜4 1/2-英寸（51至114毫米）的参考射线照片）钢铸件 |
Adjunct to E186 Volume II -- Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings |
| 204 |
ASTM E186 进口原版图谱 RRE018603 |
兼任E186第三卷 - 厚壁（2至4的1/2-英寸（51至114毫米））钢铸件参考射线照片 |
Adjunct to E186 Volume III -- Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings |
| 205 |
ASTM E186 进口原版图谱 RRE0186CS |
兼任厚壁（2至4的1/2-英寸。（51至114毫米）E186参考射线照片）钢铸件 |
Adjunct to E186 Reference Radiographs for Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings |
| 206 |
ASTM E192 进口原版图谱 |
兼任E192的航空航天应用投资的钢铸件参考射线照片 |
Adjunct to E192 Reference Radiographs for Investment Steel Castings of Aerospace Applications |
| 207 |
ASTM E208 进口原版图谱 |
辅助E208进行落锤试验测定铁素体钢的无塑性转变温度的试验方法 |
Adjunct to E208 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels |
| 208 |
ASTM E2150 进口原版图谱 ADJE2150A |
兼任E2150环境成本要素结构3，4，5和定义 |
Adjunct to E2150 Environmental Cost Element Structure at Levels 3, 4, and 5 and Definitions |
| 209 |
ASTM E2369 进口原版图谱 ADJE2369 |
兼任E2369的护理记录的连续性（CCR） |
Adjunct to E2369 Continuity of Care Record (CCR) |
| 210 |
ASTM E2369 进口原版图谱 ADJE2369CS |
兼任E2369的护理记录的连续性（CCR）+有效的标准 |
Adjunct to E2369 Continuity of Care Record (CCR) + Active Standard |
| 211 |
ASTM E242 进口原版图谱 RRE0242 |
兼任E242参考射线照片出现射线图像的某些参数发生变化 |
Adjunct to E242 Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed |
| 212 |
ASTM E2422 进口原版图谱 |
参考X光片E2422 - 铝铸件的检验标准的数字图片作为参考 |
Reference Radiograph E2422 -- Standard Digital Reference Images for Inspection of Aluminum Castings |
| 213 |
ASTM E2514 进口原版图谱 ADJE2514 |
辅助E2514演示文稿格式的基本成本估计，汇总，分析的标准实施规程 |
Adjunct to E2514 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses |
| 214 |
ASTM E2600 进口原版图谱 ADJE260010 |
兼任汽侵占筛选E2600指南在房地产交易中涉及财产的 |
Adjunct to E2600 Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions |
| 215 |
ASTM E2660 进口原版图谱 RRE2660 |
兼任E2660标准的数字图片作为参考，投资钢铸件的航空航天应用 |
Adjunct to E2660 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
| 216 |
ASTM E2669 进口原版图谱 RRE2669 |
兼任E2669标准的数字图片作为参考，钛铸件 |
Adjunct to E2669 Standard Digital Reference Images for Titanium Castings |
| 217 |
ASTM E272 进口原版图谱 RRE0272 |
兼任E272高强度铜基地和镍铜合金铸件参考射线照片 |
Adjunct to E272 Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| 218 |
ASTM E280 进口原版图谱 RRE028001 |
兼任E280第I卷 - 厚壁（4 1/2至12英寸（114至305毫米））钢铸件参考射线照片 |
Adjunct to E280 Volume I -- Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings |
| 219 |
ASTM E280 进口原版图谱 RRE028002 |
兼任E280第二卷 - 参考X光片钢铸件厚壁（4 1/2至12英寸（114至305毫米）） |
Adjunct to E280 Volume II -- Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings |
| 220 |
ASTM E280 进口原版图谱 RRE0280CS |
兼任E280厚壁（4 1/2至12英寸（114至305毫米））钢铸件参考射线照片 |
Adjunct to E280 Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings |
| 221 |
ASTM E308 进口原版图谱 ADJE0308A |
兼任使用CIE系统计算物体颜色的E308实践 |
Adjunct to E308 Practice for Computing the Colors of Objects by Using the CIE System |
| 222 |
ASTM E310 进口原版图谱 RRE0310 |
兼任E310锡青铜铸件参考射线照片 |
Adjunct to E310 Reference Radiographs for Tin Bronze Castings |
| 223 |
ASTM E381 进口原版图谱 |
辅助E381的宏观腐蚀钢棒材，钢坯，大方坯和锻件的方法 |
Adjunct to E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| 224 |
ASTM E390 进口原版图谱 RRE039001 |
兼任E390第I卷 - 钢熔化焊焊缝的参考射线照片 |
Adjunct to E390 Volume I -- Reference Radiographs for Steel Fusion Welds |
| 225 |
ASTM E390 进口原版图谱 RRE039002 |
兼任E390第二卷 - 钢熔化焊焊缝的参考射线照片 |
Adjunct to E390 Volume II -- Reference Radiographs for Steel Fusion Welds |
| 226 |
ASTM E390 进口原版图谱 RRE039003 |
兼任至E390音量III - 钢熔化焊焊缝的参考射线照片 |
Adjunct to E390 Volume III -- Reference Radiographs for Steel Fusion Welds |
| 227 |
ASTM E390 进口原版图谱 RRE0390CS |
钢熔化焊焊缝辅助E390参考射线照片 |
Adjunct to E390 Reference Radiographs for Steel Fusion Welds |
| 228 |
ASTM E433 进口原版图谱 ADJE0433 |
兼任E433液体渗透检验的参考照片 |
Adjunct to E433 Reference Photographs for Liquid Penetrant Inspection |
| 229 |
ASTM E446 进口原版图谱 RRE044601 |
兼任E446第I卷 - 钢铸件参考射线照片至2英寸（51毫米）的厚度 |
Adjunct to E446 Volume I -- Reference Radiographs for Steel Castings Up to 2 in. (51 mm) in Thickness |
| 230 |
ASTM E446 进口原版图谱 RRE044602 |
兼任E446第二卷 - 钢铸件参考射线照片至2英寸（51毫米）的厚度 |
Adjunct to E446 Volume II --Reference Radiographs for Steel Castings Up to 2 in. (51 mm) in Thickness |
| 231 |
ASTM E446 进口原版图谱 RRE044603 |
兼任至E446音量III - 钢铸件参考射线照片至2英寸（51毫米）的厚度 |
Adjunct to E446 Volume III -- Reference Radiographs for Steel Castings Up to 2 in. (51 mm) in Thickness |
| 232 |
ASTM E446 进口原版图谱 RRE0446CS |
兼任E446钢铸件参考射线照片至2英寸（51毫米）的厚度 |
Adjunct to E446 Reference Radiographs for Steel Castings Up to 2 in. (51 mm) in Thickness |
| 233 |
ASTM E45 进口原版图谱 |
兼任E45钢中夹杂物含量 |
Adjunct to E45 Determining the Inclusion Content of Steel |
| 234 |
ASTM E45 进口原版图谱 ADJE004501 |
兼任E45钢中夹杂物含量 |
Adjunct to E45 Determining the Inclusion Content of Steel |
| 235 |
ASTM E505 进口原版图谱 RRE0505 |
兼任E505参考X光片检查的铝，镁合金压铸 |
Adjunct to E505 Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
| 236 |
ASTM E592 进口原版图谱 RRE0592 |
兼任E592钢板的1/4到2英寸（6毫米至51毫米）厚的X射线和1至6英寸（25至152毫米）厚，钴60放射学指南“，以获得ASTM等效透度计灵敏度 |
Adjunct to E592 Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60 |
| 237 |
ASTM E595 进口原版图谱 ADJE0595 |
兼任E595的总质量损失的测试方法，并从收集到的挥发性可凝聚物在真空环境中的气体释放 |
Adjunct to E595 Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| 238 |
ASTM E768 进口原版图谱 |
兼任E768实践准备和评估样品自动列入评估钢 |
Adjunct to E768 Practice for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel |
| 239 |
ASTM E802 进口原版图谱 RRE080201 |
兼任灰铁铸件4 1/2英寸（114毫米），厚度E802参考射线照片 |
Adjunct to E802 Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness |
| 240 |
ASTM E802 进口原版图谱 RRE080202 |
兼任灰铁铸件4 1/2英寸（114毫米），厚度E802参考射线照片 |
Adjunct to E802 Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness |
| 241 |
ASTM E802 进口原版图谱 RRE080203 |
兼任灰铁铸件4 1/2英寸（114毫米），厚度E802参考射线照片 |
Adjunct to E802 Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness |
| 242 |
ASTM E802 进口原版图谱 RRE0802CS |
兼任灰铁铸件4 1/2英寸（114毫米），厚度E802参考射线照片 |
Adjunct to E802 Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness |
| 243 |
ASTM E82 进口原版图谱 |
兼任E82的标准试验方法测定金属晶体取向的 |
Adjunct to E82 Standard Test Method for Determining the Orientation of a Metal Crystal |
| 244 |
ASTM E828 进口原版图谱 |
辅助E828 RDF-3的大小指定从筛析试验方法 |
Adjunct to E828 Test Method for Designating the Size of RDF-3 From its Sieve Analysis |
| 245 |
ASTM E917 进口原版图谱 ADJE091703 |
辅助测量生命周期成本的建筑物和建筑系统和F1675涵洞，排水和其它地下管道用塑料管的寿命周期成本分析的标准规程E917实践 |
Adjunct to E917 Practice for Measuring Life-Cycle Costs of Buildings and Building Systems and F1675 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits |
| 246 |
ASTM E930 进口原版图谱 |
兼任E930试验方法估算的最大晶粒观察到在一个的金相组（ALA晶粒尺寸） |
Adjunct to E930 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
| 247 |
ASTM F112 进口原版图谱 ADJF0112 |
辅助F112包封衬垫密封性试验方法 |
Adjunct to F112 Test Method for Sealability of Enveloped Gaskets |
| 248 |
ASTM F1364 进口原版图谱 ADJF1364 |
兼任F1364使用的校准设备验证干涉激光成像无损轮胎检验系统的检验能力的实践 |
Adjunct to F1364 Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System |
| 249 |
ASTM F1409 进口原版图谱 ADJF1409 |
兼任F1409测试方法真空吸尘器直线移动的，而清洁地毯 |
Adjunct to F1409 Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| 250 |
ASTM F1423 进口原版图谱 ADJF1423 |
兼任F1423实践，为不影响个人电脑的打印机生产的单色图像质量的测定 |
Adjunct to F1423 Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers |
| 251 |
ASTM F1424 进口原版图谱 ADJF1424 |
辅助F1424的测试方法，利用干单或双组分墨粉，碳粉使用量估计全彩色复印机 |
Adjunct to F1424 Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono-or-Dual-Component Toners |
| 252 |
ASTM F1478 进口原版图谱 ADJF1478 |
兼任F1478生产复印机和打印机的图像耐磨性的测定试验方法（泰伯法） |
Adjunct to F1478 Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) |
| 253 |
ASTM F1734 进口原版图谱 ADJF1734 |
辅助F1734资格的挤压工具，管相结合，实践和挤压关程序，以避免在聚乙烯（PE）燃气管道的长期损害 |
Adjunct to F1734 Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe |
| 254 |
ASTM F1790 进口原版图谱 ADJF1790 |
兼任F1790的标准测试方法测量抗切割性防护服装材料 |
Adjunct to F1790 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing |
| 255 |
ASTM F2508 进口原版图谱 ADJF250801 |
兼任F2508实践的验证和校准走道凉风坐垫使用参考表面 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
| 256 |
ASTM F2508 进口原版图谱 ADJF250802 |
兼任F2508实践的验证和校准走道凉风坐垫使用参考表面 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
| 257 |
ASTM F2508 进口原版图谱 ADJF250803 |
兼任F2508实践的验证和校准走道凉风坐垫使用参考表面 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
| 258 |
ASTM F2508 进口原版图谱 ADJF250804 |
兼任F2508实践的验证和校准走道凉风坐垫使用参考表面 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
| 259 |
ASTM F2508 进口原版图谱 ADJF2508CS |
辅助F2508实践的验证和校准使用参考表面的走道凉风坐垫（全套） |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces (Complete Set) |
| 260 |
ASTM F363 进口原版图谱 ADJF0363 |
兼任F363测试方法垫片腐蚀试验 |
Adjunct to F363 Test Method for Corrosion Testing of Gaskets |
| 261 |
ASTM F37 进口原版图谱 ADJF0037 |
辅助F37的垫片材料密封性试验方法 |
Adjunct to F37 Test Methods for Sealability of Gasket Materials |
| 262 |
ASTM F38 进口原版图谱 ADJF003801 |
辅助F38的垫片材料的蠕变松弛试验方法 |
Adjunct to F38 Test Methods for Creep Relaxation of a Gasket Material |
| 263 |
ASTM F38 进口原版图谱 ADJF003802 |
辅助F38的垫片材料的蠕变松弛试验方法 |
Adjunct to F38 Test Methods for Creep Relaxation of a Gasket Material |
| 264 |
ASTM F431 进口原版图谱 ADJF0431 |
兼任F431规格的空气动力性能测量充气室的真空吸尘器 |
Adjunct to F431 Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners |
| 265 |
ASTM F434 进口原版图谱 ADJF0434 |
兼任F434预制密封垫击出测试的测试方法 |
Adjunct to F434 Test Method for Blow-Out Testing of Preformed Gaskets |
| 266 |
ASTM F584 进口原版图谱 ADJF0584 |
兼任F584实践半导体引线键合丝的目视检查 |
Adjunct to F584 Practice for Visual Inspection of Semiconductor Lead-Bonding Wire |
| 267 |
ASTM F609 进口原版图谱 ADJF0609 |
兼任F609测试方法，为使用横拉Slipmeter，（HPS） |
Adjunct to F609 Test Method for Using a Horizontal Pull Slipmeter (HPS) |
| 268 |
ASTM F68 进口原版图谱 ADJF0068 |
辅助F68无氧铜锻造表格电子器件的标准规范 |
Adjunct to F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices |
| 269 |
ASTM F718 进口原版图谱 ADJF0718 |
兼任F718标准造船和船舶油漆及涂料制品/工艺数据表 |
Adjunct to F718 Standard for Shipbuilders and Marine Paints and Coatings Product/ Procedure Data Sheet |
| 270 |
ASTM F792 进口原版图谱 ADJF0792 |
兼任F792的安全性X-射线系统的成像性能评估的标准操作规程 |
Adjunct to F792 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems |
| 271 |
ASTM F806 进口原版图谱 ADJF0806 |
兼任F806测试方法的复合密封材料的可压缩性和恢复 |
Adjunct to F806 Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
| 272 |
ASTM F875 进口原版图谱 ADJF0875 |
大面积密度和背景的评价办公室复印机兼任F875测试方法 |
Adjunct to F875 Test Method for Evaluation of Large Area Density and Background on Office Copiers |
| 273 |
ASTM F941 进口原版图谱 ADJF0941 |
兼任F941的标准实践检验的船体表面准备和涂料应用 |
Adjunct to F941 Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| 274 |
ASTM F995 进口原版图谱 ADJF0995 |
估计在复印机碳粉使用量，利用干式双组份开发辅助F995实践 |
Adjunct to F995 Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer |
| 275 |
ASTM G134 进口原版图谱 ADJG0134 |
兼任G134固体材料的侵蚀试验方法的空化液体射流 |
Adjunct to G134 Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet |
| 276 |
ASTM G173 进口原版图谱 ADJG173CD |
兼任G173 - 简单大气传输模型的阳光（SMARTS2版本2.9.2） |
Adjunct to G173 -- Simple Model for Atmospheric Transmission of Sunshine (SMARTS2 Version 2.9.2) |
| 277 |
ASTM G34 进口原版图谱 ADJG003402 |
辅助G34剥落腐蚀敏感性的试验方法2XXX和7XXX系列铝合金（EXCO测试） |
Adjunct to G34 Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) |
| 278 |
ASTM G61 进口原版图谱 ADJG0061 |
兼任G61测试方法进行铁，镍或钴基合金的局部腐蚀敏感性的循环动电位极化测量 |
Adjunct to G61 Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| 279 |
ASTM G66 进口原版图谱 ADJG0066 |
兼任G66测试方法5XXX系列铝合金的剥落腐蚀敏感性的视觉评估（ASSET试验） |
Adjunct to G66 Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| 280 |
ASTM G7 进口原版图谱 ADJG0007 |
兼任G7非金属材料的大气环境曝露试验的实践 |
Adjunct to G7 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials |
| 281 |
ASTM G88 进口原版图谱 ADJG0088 |
兼任G88用于氧气服务的制度设计指南（VHS） |
Adjunct to G88 Guide for Designing Systems for Oxygen Service (VHS) |
| 282 |
ASTM G88 进口原版图谱 ADJG0088DVD |
兼任G88用于氧气服务的制度设计指南（DVD） |
Adjunct to G88 Guide for Designing Systems for Oxygen Service (DVD) |
| 283 |
ASTM G94 进口原版图谱 ADJG0094 |
兼任G94指南“评定金属氧服务
|
Adjunct to G94 Guide for Evaluating Metals for Oxygen Service |
网站首页 >> 本站资讯 
