117 |
D13 - Textiles |
|
D13 - 纺织 |
118 |
ADJD1770 |
Adjunct to D1770 Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top |
ADJD1770辅助D1770测试方法棉结,植物性物质,与有色纤维毛条 |
119 |
ADJD2255 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance |
分级细纱外观ADJD2255辅助D2255试验方法 |
120 |
ADJD225501 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 1-79 |
ADJD225501辅助D2255试验方法分级纱线的外观 - 系列1-79 |
121 |
ADJD225501C |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 1-79 (Combination product -- adjunct plus standard) |
ADJD225501C辅助纱线的外观分级D2255测试方法 - 系列1-79(组合产品 - 辅助加标准) |
122 |
ADJD225502 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 2-79 |
ADJD225502辅助D2255试验方法分级纱线的外观 - 系列2-79 |
123 |
ADJD225502C |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 2-79 (Combination product -- adjunct plus standard) |
ADJD225502C辅助纱线的外观分级D2255测试方法 - 系列2-79(组合产品 - 辅助加标准) |
124 |
ADJD225503 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 3-79 |
ADJD225503辅助D2255试验方法分级纱线的外观 - 系列3-79 |
125 |
ADJD225503C |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 3-79 (Combination product -- adjunct plus standard) |
ADJD225503C辅助纱线的外观分级D2255测试方法 - 系列3-79(组合产品 - 辅助加标准) |
126 |
ADJD225504 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 4-79 |
ADJD225504辅助D2255试验方法分级纱线的外观 - 系列4-79 |
127 |
ADJD225504C |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 4-79 (Combination product -- adjunct plus standard) |
ADJD225504C辅助纱线的外观分级D2255测试方法 - 系列4-79(组合产品 - 辅助加标准) |
128 |
ADJD225505 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 5-79 |
ADJD225505辅助D2255试验方法分级纱线的外观 - 系列5-79 |
129 |
ADJD225505C |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 5-79 (Combination product -- adjunct plus standard) |
ADJD225505C辅助纱线的外观分级D2255测试方法 - 系列5-79(组合产品 - 辅助加标准) |
130 |
ADJD225506 |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 6-79 |
ADJD225506辅助D2255试验方法分级纱线的外观 - 系列6-79 |
131 |
ADJD225506C |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance -- Series 6-79 (Combination product -- adjunct plus standard) |
ADJD225506C辅助纱线的外观分级D2255测试方法 - 系列6-79(组合产品 - 辅助加标准) |
132 |
ADJD2255ALL |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance —Series 1-79, Series 2-79, Series 3-79, Series 4-79, Series 5-79, and Series 6-79 (Combination product) |
ADJD2255ALL兼任分级纱线外观系列1-79,5-79系列,系列4-79 3-79 2-79系列,系列和系列6-79(D2255测试方法相结合的产物) |
133 |
ADJD2255STD |
Adjunct to D2255 Test Method for Grading Spun Yarns for Appearance — Series 1-79, Series 2-79, Series 3-79, Series 4-79, Series 5-79, and Series 6-79 (Combination product — 6 adjuncts plus standard) |
ADJD2255STD辅助D2255测试方法分级纱线的外观 - 系列1-79,5-79系列,系列2-79,3-79系列,系列4-79和6-79组(组合产品 - 6个辅助加标准) |
134 |
ADJD3512 |
Adjunct to D3512 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
ADJD3512辅助D3512起毛起球性及其它有关表面变化的纺织面料:乱翻式起毛起球测试仪的测试方法 |
135 |
ADJD3514 |
Adjunct to D3514 Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad |
ADJD3514辅助D3514起毛起球性及其它有关表面变化的纺织面料:弹性垫 |
136 |
ADJD4231 |
Adjunct to D4231 Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts |
评价HygrometerD4231 - 01可洗涤机织衬衫和运动衫的ADJD4231辅助D4231实践 |
137 |
ADJD4685 |
Adjunct to D4685 Standard Test Method for Pile Fabric Abrasion |
ADJD4685辅助桩织物耐磨D4685的标准测试方法 |
138 |
ADJD5426 |
Adjunct to D5426 Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints |
ADJD5426辅助D5426用于充气减震织物的外观检查和分级的做法 |
139 |
ADJD5489-E-PDF |
Adjunct to D5489 Standard Guide for Care Symbols for Care Instructions on Textile Products |
ADJD5489-E-D5489护理符号的标准指南的PDF兼任纺织产品保养说明 |
140 |
ADJD6478 |
Adjunct to D6478 Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints |
ADJD6478辅助D6478试验方法确定具体的填充性面料充气约束 |
141 |
ADJD6478A |
Adjunct to D6478 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints |
ADJD6478A兼任D6478的标准试验方法确定具体的填充性面料充气约束 |
142 |
ADJD7331A |
Adjunct to D7331 Standard Practice for Sewn Products Marker Data Interchange |
ADJD7331A兼任D7331缝制产品标记数据交换的标准规程 |
143 |
ADJD7331CS |
Adjunct to D7331 Standard Practice for Sewn Products Marker Data Interchange + Active Standard |
ADJD7331CS辅助D7331缝制产品标记数据交换的标准规程+有效的标准 |
144 |
D14 - Adhesives |
|
D14 - 胶粘剂 |
145 |
ADJD1781 |
Adjunct to D1781 Test Method for Climbing Drum Peel for Adhesives |
ADJD1781辅助D1781滚筒剥离胶粘剂的测试方法 |
146 |
ADJD1828 |
Adjunct to D1828 Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
大气暴露的胶接接头和结构的ADJD1828辅助D1828实践 |
147 |
ADJD2094 |
Adjunct to D2094 Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
ADJD2094辅助D2094实践棒材和盘条试样的制备附着力测试 |
148 |
ADJD2294 |
Adjunct to D2294 Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
ADJD2294辅助D2294测试方法胶粘剂拉伸剪切蠕变性能(金属对金属) |
149 |
ADJD2739 |
Adjunct to D2739 Test Method for Volume Resistivity of Conductive Adhesives |
ADJD2739辅助D2739试验方法导电胶体积电阻率 |
150 |
ADJD2919 |
Adjunct to D2919 Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
ADJD2919辅助D2919试验方法确定胶接头的耐久性强调,在拉伸剪切 |
151 |
ADJD4501 |
Adjunct to D4501 Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
硬质衬底之间的粘接剪切强度的块剪法ADJD4501辅助D4501试验方法 |
152 |
ADJD4680 |
Adjunct to D4680 Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
ADJD4680辅助D4680试验方法的蠕变和胶粘剂静剪切压力负荷故障时间(木木) |
153 |
ADJD5266 |
Adjunct to D5266 Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
ADJD5266辅助D5266估计对木材破坏百分率的胶接接头的实践 |
154 |
ADJD5573 |
Adjunct to D5573 Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
ADJD5573辅助D5573纤维增强塑料(FRP)接头失效方式分类的实践 |
155 |
D15 - Engine Coolants and Related Fluids |
D15 - 发动机冷却液及相关液体 |
156 |
ADJD1384 |
Adjunct to D1384 Test Method for Corrosion Test for Engine Coolants in Glassware |
ADJD1384辅助D1384玻璃器皿中发动机冷却剂腐蚀试验的试验方法 |
157 |
ADJD257001 |
Adjunct to D2570 Test Method for Simulated Service Corrosion Testing of Engine Coolants |
ADJD257001辅助D2570试验方法模拟发动机冷却剂腐蚀试验 |
158 |
ADJD257002 |
Adjunct to D2570 Test Method for Simulated Service Corrosion Testing of Engine Coolants |
ADJD257002辅助D2570试验方法模拟发动机冷却剂腐蚀试验 |
159 |
ADJD2809 |
Adjunct to D2809 Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
ADJD2809辅助D2809发动机冷却剂的铝泵的气蚀和冲刷腐蚀特性的试验方法。 |
160 |
D18 - Soil and Rock |
D18 - 土壤和岩石 |
161 |
ADJD0422 |
Adjunct to D422 Test Method for Particle-Size Analysis of Soils |
ADJD0422辅助D422土壤粒径分析测试方法 |
162 |
ADJD284401 |
Adjunct to D2844 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils |
ADJD284401辅助D2844测试方法电阻R-值和膨胀压力的压实的土壤 |
163 |
ADJD284402 |
Adjunct to D2844 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils |
ADJD284402辅助D2844测试方法电阻R-值和膨胀压力的压实的土壤 |
164 |
ADJD284403 |
Adjunct to D2844 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils |
ADJD284403辅助D2844测试方法电阻R-值和膨胀压力的压实的土壤 |
165 |
ADJD7012 |
Adjunct to D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
ADJD7012辅助D7012的标准测试方法的完整岩心样品的抗压强度和弹性模量不同状态下的压力和温度 |
166 |
D19 - Water |
|
D19 - 水 |
167 |
ADJDQCALC |
Adjunct to D7510 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water and D2777 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ADJDQCALC辅助D7510标准规程进行检测和定量估计和数据评估利用DQCALC软件,根据ASTM委员会D19的实践D6091和D6512上的水和D2777的标准实施规程委员会D19水适用的试验方法测定的精密度和偏差的 |
168 |
D20 - Plastics |
|
D20 - 塑料 |
169 |
ADJD0731 |
Adjunct to D731 Test Method for Molding Index of Thermosetting Molding Powder |
ADJD0731辅助D731热固性模塑粉模塑指数的测试方法 |
170 |
ADJD0746 |
Adjunct to D746 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
ADJD0746辅助D746试验方法塑料及弹性材料的脆化温度的影响 |
171 |
ADJD1004 |
Adjunct to D1004 Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
ADJD1004辅助D1004试验方法的抗撕裂性的塑料薄膜和薄片 |
172 |
ADJD1494 |
Adjunct to D1494 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
ADJD1494辅助D1494增强塑料板的散射光透射率的测试方法 |
173 |
ADJD169302 |
Adjunct to D1693 Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ADJD169302辅助D1693试验方法的乙烯塑料环境应力开裂 |
174 |
ADJD169303 |
Adjunct to D1693 Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ADJD169303辅助D1693试验方法的乙烯塑料环境应力开裂 |
175 |
ADJD169304 |
Adjunct to D1693 Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ADJD169304辅助D1693试验方法的乙烯塑料环境应力开裂 |
176 |
ADJD1693CS |
Adjunct to D1693 Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ADJD1693CS辅助D1693测试方法乙烯塑料环境应力开裂 |
177 |
ADJD2562 |
Adjunct to D2562 Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics |
ADJD2562辅助D2562实践中可见缺陷分类纤维增强热固性塑料零件成型 |
178 |
ADJD2563 |
Adjunct to D2563 Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts |
ADJD2563辅助D2563玻璃纤维增强塑料层压零件中可见缺陷分类的实践 |
179 |
ADJD2843 |
Adjunct to D2843 Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
ADJD2843辅助D2843塑料燃烧或分解的烟密度试验方法 |
180 |
ADJD4703 |
Adjunct to D4703 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
ADJD4703辅助D4703标准规程压缩成型热塑性材料成试样,斑块,或表 |
181 |
ADJD7611-E-PDF |
Adjunct to D7611/D7611M Standard Practice for Coding Plastic Manufactured Articles for Resin Identification |
ADJD7611-E-PDF兼任塑料制品树脂识别编码标准实践D7611/D7611M |
182 |
ADJD7611CS |
Adjunct to D7611/D7611M Standard Practice for Coding Manufactured Articles for Resin Identification + Active Standard |
ADJD7611CS兼任D7611/D7611M制品树脂识别编码标准的做法+有效的标准 |
183 |
D24 - Carbon Black |
D24 - 炭黑 |
184 |
ADJD266301 |
Adjunct to D2663 Test Methods for Carbon Black-Dispersion in Rubber |
炭黑在橡胶中的分散ADJD266301辅助D2663试验方法 |
185 |
ADJD266302 |
Adjunct to D2663 Test Methods for Carbon Black-Dispersion in Rubber |
炭黑在橡胶中的分散ADJD266302辅助D2663试验方法 |
186 |
D27 - Electrical Insulating Liquids and Gases |
D27 - 电绝缘液体和气体 |
187 |
ADJD2477-E-PDF |
Adjunct to D2477 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies |
ADJD2477 PDF-E-D2477测试方法在工业电源频率下的介电击穿电压和介电强度,绝缘气体辅助 |
188 |
D30 - Composite Materials |
D30 - 复合材料 |
189 |
ADJD3410 |
Adjunct to D3410/D3410M Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
ADJD3410兼任到D3410/D3410M的测试方法剪切载荷压缩性能的聚合物基复合材料,与不支持Gage的第 |
190 |
ADJD4255-E-PDF |
Adjunct to D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
ADJD4255-E-PDF辅助D4255/D4255M聚合物基复合材料的面内剪切性能的标准试验方法的铁剪法 |
191 |
ADJD5379 |
Adjunct to D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
ADJD5379辅助D5379/D5379M的标准测试方法的复合材料剪切性能的V-缺口梁法 |
192 |
ADJD6416 |
Adjunct to D6416/D6416M Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
ADJD6416的辅助D6416/D6416M测试方法对于二维简支夹芯复合板的弯曲性能受到分布式负载 |
193 |
ADJD6641 |
Adjunct to D6641/D6641M Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture |
ADJD6641的辅助D6641/D6641M试验方法测定聚合物基复合材料层合板的抗压性能,用组合式荷载压力测试夹具(CLC) |
194 |
ADJD7078 |
Adjunct to D7078 -- D V-Notched Rail Shear Fixture Machining Drawings |
ADJD7078辅助的D7078 - D V-缺口铁剪夹具加工图纸 |
195 |
D31 - Leather |
|
D31 - 皮革 |
196 |
ADJD1912 |
Adjunct to D1912 Test Method for Cold-Crack Resistance of Upholstery Leather |
ADJD1912辅助D1912试验方法的耐冷裂纹的装饰用皮革 |
197 |
ADJD2096 |
Adjunct to D2096 Test Method for Colorfastness and Transfer of Color in the Washing of Leather |
ADJD2096辅助D2096皮革洗涤时的色牢度试验方法和转让的颜色 |
198 |
ADJD282101 |
Adjunct to D2821 Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus |
ADJD282101辅助D2821扭丝装置,通过测量皮革的相对硬度的测试方法 |
199 |
ADJD282102 |
Adjunct to D2821 Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus |
ADJD282102辅助D2821扭丝装置,通过测量皮革的相对硬度的测试方法 |
200 |
D34 - Waste Management |
D34 - 废物管理 |
201 |
ADJE0828 |
Adjunct to E828 Test Method for Designating the Size of RDF-3 From its Sieve Analysis |
ADJE0828辅助E828 RDF-3的大小指定从筛析试验方法 |
202 |
D35 - Geosynthetics |
D35 - 土工合成材料 |
203 |
ADJD4491 |
Adjunct to D4491 Test Methods for Water Permeability of Geotextiles by Permittivity |
ADJD4491辅助D4491试验方法透水土工布的介电常数 |
204 |
ADJD5596 |
Adjunct to D5596 Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
ADJD5596辅助D5596的炭黑分散的微观评价聚烯烃土工合成材料 |