| 291 |
F01 - Electronics |
F01 - 电子 |
| 292 |
ADJF0584 |
Adjunct to F584 Practice for Visual Inspection of Semiconductor Lead-Bonding Wire |
ADJF0584辅助F584实践的半导体引线键合丝的外观检查 |
| 293 |
F03 - Gaskets |
|
F03 - 垫片 |
| 294 |
ADJF0037 |
Adjunct to F37 Test Methods for Sealability of Gasket Materials |
ADJF0037辅助F37的垫片材料密封性试验方法 |
| 295 |
ADJF003801 |
Adjunct to F38 Test Methods for Creep Relaxation of a Gasket Material |
ADJF003801辅助F38的垫片材料的蠕变松弛试验方法 |
| 296 |
ADJF003802 |
Adjunct to F38 Test Methods for Creep Relaxation of a Gasket Material |
ADJF003802辅助F38的垫片材料的蠕变松弛试验方法 |
| 297 |
ADJF0112 |
Adjunct to F112 Test Method for Sealability of Enveloped Gaskets |
ADJF0112辅助F112包封衬垫密封性试验方法 |
| 298 |
ADJF0363 |
Adjunct to F363 Test Method for Corrosion Testing of Gaskets |
ADJF0363辅助F363衬垫的腐蚀试验的测试方法 |
| 299 |
ADJF0434 |
Adjunct to F434 Test Method for Blow-Out Testing of Preformed Gaskets |
ADJF0434辅助F434预制密封垫击出测试的测试方法 |
| 300 |
ADJF0806 |
Adjunct to F806 Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials |
ADJF0806辅助F806测试方法的复合密封材料的可压缩性和恢复 |
| 301 |
F05 - Business Imaging Products |
F05 - 商务影像产品 |
| 302 |
ADJF0875 |
Adjunct to F875 Test Method for Evaluation of Large Area Density and Background on Office Copiers |
ADJF0875辅助F875测试方法大面积密度和背景的评价办公室复印机 |
| 303 |
ADJF0995-E-PDF |
Adjunct to F995 Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer |
估计在复印机碳粉使用量，利用干式双组份开发ADJF0995-E-PDF兼任F995实践 |
| 304 |
ADJF1423 |
Adjunct to F1423 Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers |
ADJF1423辅助F1423实践的单色图像质量的测定产生的影响非个人电脑打印机 |
| 305 |
ADJF1424 |
Adjunct to F1424 Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono-or-Dual-Component Toners |
ADJF1424辅助F1424的测试方法利用干单或双组分墨粉，碳粉使用量估计全彩色复印机 |
| 306 |
ADJF1478 |
Adjunct to F1478 Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) |
ADJF1478辅助F1478的测试方法生产复印机和打印机的图像耐磨性的测定（泰伯方法） |
| 307 |
F07 - Aerospace and Aircraft |
F07 - 航空航天和飞机 |
| 308 |
ADJD2512 |
Adjunct to D2512 Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) |
材料与液氧相容性（冲击敏感阈值“和”通行证失效技术ADJD2512辅助D2512试验方法） |
| 309 |
F09 - Tires |
|
F09 - 轮胎 |
| 310 |
ADJF1364 |
Adjunct to F1364 Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System |
ADJF1364辅助F1364使用的校准设备验证干涉激光成像无损轮胎检验系统的检验能力的实践 |
| 311 |
F11 - Vacuum Cleaners |
F11 - 吸尘器 |
| 312 |
ADJF0431 |
Adjunct to F431 Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners |
ADJF0431辅助F431规格的空气动力性能测量充气室的真空吸尘器 |
| 313 |
ADJF1409 |
Adjunct to F1409 Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
虽然清洁地毯ADJF1409辅助F1409真空吸尘器直线移动的试验方法 |
| 314 |
F12 - Security Systems and Equipment |
F12 - 安全系统和设备 |
| 315 |
ADJF0792-E-PDF |
Adjunct to F792 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems |
ADJF0792-E-PDF兼任F792的安全性X-射线系统的成像性能评估的标准操作规程 |
| 316 |
F13 - Pedestrian/Walkway Safety and Footwear |
F13 - 行人行人/安全和鞋类 |
| 317 |
ADJF0609 |
Adjunct to F609 Test Method for Using a Horizontal Pull Slipmeter (HPS) |
ADJF0609辅助F609测试方法，为使用横拉Slipmeter，（HPS） |
| 318 |
ADJF250801 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
ADJF250801兼任F2508实践的校正和验证的走道凉风坐垫使用参考面 |
| 319 |
ADJF250802 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
ADJF250802兼任F2508实践的校正和验证的走道凉风坐垫使用参考面 |
| 320 |
ADJF250803 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
兼任F2508实践的验证和校准走道凉风坐垫使用参考表面 |
| 321 |
ADJF250804 |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces |
兼任F2508实践的验证和校准走道凉风坐垫使用参考表面 |
| 322 |
ADJF2508CS |
Adjunct to F2508 Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces (Complete Set) |
辅助F2508实践的验证和校准使用参考表面的走道凉风坐垫（全套） |
| 323 |
F17 - Plastic Piping Systems |
F17 - 塑料管道系统 |
| 324 |
ADJF1734 |
Adjunct to F1734 Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe |
辅助F1734资格的挤压工具，管相结合，实践和挤压关程序，以避免在聚乙烯（PE）燃气管道的长期损害 |
| 325 |
F23 - Personal Protective Clothing and Equipment |
F23 - 个人防护衣物和设备 |
| 326 |
ADJF1790 |
Adjunct to F1790 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing |
兼任F1790的标准测试方法测量抗切割性防护服装材料 |
| 327 |
F25 - Ships and Marine Technology |
F25 - 船舶与海洋技术 |
| 328 |
ADJF0718 |
Adjunct to F718 Standard for Shipbuilders and Marine Paints and Coatings Product/ Procedure Data Sheet |
兼任F718标准造船和船舶油漆及涂料制品/工艺数据表 |
| 329 |
ADJF0941 |
Adjunct to F941 Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
兼任F941的标准实践检验的船体表面准备和涂料应用 |
| 330 |
G01 - Corrosion of Metals |
G01 - 金属的腐蚀 |
| 331 |
ADJG003402 |
Adjunct to G34 Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) |
辅助G34剥落腐蚀敏感性的试验方法2XXX和7XXX系列铝合金（EXCO测试） |
| 332 |
ADJG0061 |
Adjunct to G61 Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
兼任G61测试方法进行铁，镍或钴基合金的局部腐蚀敏感性的循环动电位极化测量 |
| 333 |
ADJG0066 |
Adjunct to G66 Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
兼任G66测试方法5XXX系列铝合金的剥落腐蚀敏感性的视觉评估（ASSET试验） |
| 334 |
G02 - Wear and Erosion |
G02 - 磨损和腐蚀 |
| 335 |
ADJG0134-E-PDF |
Adjunct to G134 Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet |
兼任G134固体材料的侵蚀试验方法的空化液体射流 |
| 336 |
G03 - Weathering and Durability |
G03 - 耐候性和耐用性 |
| 337 |
ADJG0007 |
Adjunct to G7 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials |
兼任G7非金属材料的大气环境曝露试验的实践 |
| 338 |
ADJG173CD |
Adjunct to G173 -- Simple Model for Atmospheric Transmission of Sunshine (SMARTS2 Version 2.9.2) |
兼任G173 - 简单大气传输模型的阳光（SMARTS2版本2.9.2） |
| 339 |
G04 - Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres |
G04 - 富氧空气中的材料的相容性和灵敏 |
| 340 |
ADJG0088 |
Adjunct to G88 Guide for Designing Systems for Oxygen Service (VHS) |
兼任G88用于氧气服务的制度设计指南（VHS） |
| 341 |
ADJG0088DVD |
Adjunct to G88 Guide for Designing Systems for Oxygen Service (DVD) |
兼任G88用于氧气服务的制度设计指南（DVD） |
| 342 |
ADJG0094 |
Adjunct to G94 Guide for Evaluating Metals for Oxygen Service |
兼任G94指南“评定金属氧服务 |
网站首页 >> 本站资讯 
