标准号: |
ISO 14405-1-2016 |
英文名称: |
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes |
中标分类: |
0>>0 |
发布日期: |
2016-08 |
发布单位: |
IX-ISO |
标准状态: |
请与本站工作人员进行确认 |
ICS分类: |
公差与配合>>公差与配合 |
起草单位/标准公告: |
ISO/TC 213 Geometrische Produktspezifikationen und -prüfung;ISO/TC 213 Dimensional and geometrical product specifications and verification;ISO/TC 213 Spécifications et vérification dimensionnelles et géométriques des produits |
正文语言: |
英语 |
页数: |
56P.;A4 |
附注: |
It does not present any information on the relationship between a function or a use and a size characteristic. |
被代替标准: |
ISO 14405-1-2010;ISO/FDIS 14405-1-2015 |
引用标准: |
ISO 286-1-2010;ISO 492-2014;ISO 1101-2012;ISO 2768-1-1989;ISO 3098-2-2000;ISO 8015-2011;ISO 10579-2010;ISO 14638-2015;ISO 17450-1-2011;ISO 17450-2-2012;ISO 17450-3-2016;ISO/TS 17863-2013;ISO 81714-1-2010 |
采用关系: |
BS EN ISO 14405-1-2016,IDT;EN ISO 14405-1-2016,IDT;NF E04-563-1-2016,IDT;SN EN ISO 14405-1-2016,IDT;OENORM EN ISO 14405-1-2017,IDT;PN-EN ISO 14405-1-2016,IDT;DS/EN ISO 14405-1-2016,IDT;UNI EN ISO 14405-1-2016-2016,IDT;CSN EN ISO 14405-1-2017,IDT;DS/EN ISO 14405-1-2016,IDT;NEN-EN-ISO 14405-1-2016 en-2016,IDT |
内容提要(EN): |
Definitions;Dimensional tolerances;Dimensions;Drawing specifications;Drawing system;Drawings;Engineering drawings;Form tolerances;Fundamental tolerances;Geometric;Geometrical product specification;Geometry;GPS;Graphic symbols;Independence;Indication of dimensions;Length;Limit deviations;Linear;Linear dimensions;Marking;Product specification;Product specifications;Products;Shape;Size;Specification;Symbols;Tolerances (measurement);Tolerances of position |
归属: |
国际 |